Overview
The FUEL Off-Road D718 Heater is a 20×10 inch split spoke wheel in matte black aluminum, part number MHTD71820008947, with a 6 on 135 bolt pattern.
FUEL Off-Road offers this design in several bolt pattern and offset combinations, and the D718 Heater is the 20 by 10 inch version. Offset, center bore and backspacing are separate measurements, so compare each one with your hub and current wheels before mounting.
Key features
- 20 inch diameter and 10 inch width
- 6 on 135 bolt pattern
- Split spoke style
- Matte black finish
- Aluminum construction
- Offset -18, center bore 87 and backspacing 4.8
Matching offset to your vehicle
Offset determines where the mounting face sits relative to the hub and how far the tire moves in the wheel opening. A wheel with a negative offset sits farther out, which can help clear larger tires but adds leverage on bearings and steering parts. Because offset is not the only fit factor, compare it with the hub and the wheels the vehicle already runs, not with wheel size alone.
Backspacing gives the distance from the mounting face to the inner edge of the wheel, and it matters for brake caliper and suspension clearance. Split spoke wheels can leave less room behind the spokes than solid designs, so check caliper clearance with the tire mounted. Choosing tires with the right width and sidewall for the fender opening is part of the same decision.
- Measure caliper clearance before mounting
- Compare offset with the current wheels
- Check tire width against the fender opening
- Test steering at full lock
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD71820008947 |
| Model code | D718 Heater |
| Wheel diameter | 20 inches |
| Wheel width | 10 inches |
| Bolt pattern | 6 on 135 |
| Offset | -18 |
| Center bore | 87 |
| Backspacing | 4.8 |
| Style | Split Spoke |
| Finish | Matte Black |
| Construction | Aluminum |
Vehicle fitment
Universal fit is a general description. Bolt pattern, offset, center bore and backspacing together determine fit for a specific vehicle.
Compare the hub bolt pattern, offset and center bore with your vehicle’s specifications before ordering.
Installation notes
Check that the 6 on 135 bolt pattern, center bore and offset match your hub before mounting, because an offset that is wrong for the vehicle can cause tire or suspension rubbing. Have a tire shop that checks clearance mount and balance the wheel before driving on it.
What’s included
Check the package contents against your installation before starting.

















