Overview
The FUEL Off-Road D741 Runner 24×12 wheel, part number MHTD74124201847, is a 24-inch aluminum wheel with a 12-inch width, an 8 on 180 bolt pattern and a -44 offset, finished in gloss black milled. It belongs to the D741 Runner series and uses a directional style, which means the spokes are designed to turn in one rotational direction.
Shoppers searching for a 24×12 Runner wheel in an 8 on 180 pattern will find the bolt pattern, center bore and offset listed below. No vehicle is named for this wheel, so match those measurements to your own hub before choosing it.
Key features
- Directional Runner design with a gloss black milled face
- Aluminum construction
- 24-inch diameter and 12-inch width
- 8 on 180 bolt pattern with a 125 center bore
- -44 offset and 4.77 backspacing
Why offset matters
A -44 offset places the mounting face well outboard of the centerline, which changes how a wide wheel sits in the wheel well. Clearance at the fender, brake caliper and suspension arm all shift together, so one measurement is not enough. Measure at full steering lock and at full suspension compression before deciding.
Offset also affects load on the wheel bearings and steering components. Keep the offset close to the vehicle’s original design unless the change is intended and the clearance has been confirmed. Tire width should match the rim width, since a mismatch can change the tread shape and sidewall flex.
- Check fender clearance at full lock
- Confirm caliper room through the spokes
- Match tire width to rim width
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD74124201847 |
| Series | D741 Runner |
| Style | Directional |
| Finish | Gloss black milled |
| Construction | Aluminum |
| Diameter | 24 inches |
| Width | 12 inches |
| Bolt pattern | 8 on 180 |
| Center bore | 125 |
| Offset | -44 |
| Backspacing | 4.77 |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Match the bolt pattern, center bore and offset to your hub, and check clearances before mounting.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the 8 on 180 bolt pattern and 125 center bore match your hub before mounting. The -44 offset pushes the wheel outward, so check brake, fender and suspension clearance. Torque lug nuts to your vehicle’s specification.
What’s included
Review whether lug nuts, center caps and valve stems are needed for your install.
Not included: Tires, to confirm before buying














