Overview
The FUEL Off-Road Shok D664 is a 17 by 9 inch aluminum spoke wheel, part number MHTD66417905650, with a 5 on 150 bolt pattern. It is a universal fit wheel, so it is not built around one vehicle, and the five-lug hub layout is the first measurement to confirm.
The matte black finish gives the wheel a non-glossy surface. The 110 center bore, offset of 1 and backspacing of 5 determine how the wheel seats on the hub and how far its back edge sits from the mounting face.
Key features
- 17-inch diameter and 9-inch width in a spoke style
- Aluminum construction
- 5 on 150 bolt pattern
- Offset of 1, center bore of 110 and backspacing of 5
- Matte black finish
- Universal fit, not built for one model
Hub-centric fit and spacers
A 110 center bore that matches the hub lets the wheel center itself, so the lug nuts carry only clamping load rather than the full weight. When the bore is larger than the hub, hub-centric rings are commonly used to fill the gap. Rings should be fitted to the hub and sized to the bore before the wheel is installed, and they should be checked for a snug, rock-free fit.
Offset controls where the mounting face sits, so a change in offset moves the wheel in or out relative to the fender and control arms. Spacers can alter this position but add stress to wheel studs and bearings, so they are best avoided unless the fit is well understood. Inspect the spokes and bead seat after the first few drives for chips or cracks.
- Confirm the hub bore against the wheel bore
- Keep rings and spacers the same material as the hub
- Retorque lug nuts after the first drives
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD66417905650 |
| Model | Shok D664 |
| Wheel diameter | 17 inches |
| Wheel width | 9 inches |
| Bolt pattern | 5 on 150 |
| Offset | 1 |
| Center bore | 110 |
| Backspacing | 5 |
| Style | Spoke |
| Finish | Matte black |
| Construction | Aluminum |
| Fit type | Universal fit |
Vehicle fitment
This is a universal fit wheel, so it is not matched to a particular model. Your hub must measure 5 on 150 with a 110 center bore, and the offset of 1 affects fender position, so check both before mounting.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Tires need separate mounting. Verify the 110 center bore against the hub before mounting, then check the offset and backspacing for brake and fender clearance.
What’s included
The wheel is the item in this package. Check the package contents against your installation before starting.











