Overview
The Crown Automotive 5066066AA is a steel Dana 30 front axle shaft seal designed to press into the housing. It is a direct fit for the Dana 30 front axle.
It sits in the inner axle position and is made to seal the Dana 30 axle shaft.
Key features
- Steel construction
- Press-in installation
- Direct fit
- Dana 30 front axle seal
Pressing in a new seal
A press-in axle seal sits in the housing bore and keeps lubricant from leaking past the axle shaft. When the old seal is removed, inspect the bore for scoring, rust or pitting, since any damage can cause a new seal to leak. Clean the surface and check that the seal lip is undamaged before installation.
Install the seal squarely using a driver that matches the seal outside diameter, and tap evenly until it seats flush. Seals are often replaced alongside the axle bearing or the axle shaft when the housing is opened, so check those parts while the axle is apart.
- Clean the bore before pressing
- Keep the seal square in the bore
- Inspect the axle shaft journal for wear
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 5066066AA |
| UPC | 848399034004 |
| Axle | Dana 30 front |
| Material | Steel |
| Installation | Press in |
| Fit type | Direct fit |
Vehicle fitment
It ties to the Dana 30 front axle and is a direct fit. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Press-in seals need a seal driver of the right size and a clean bore. Confirm the old seal is out and the housing surface is clean before pressing the new seal in squarely.
What’s included
The seal ships alone with no other items included.









