Overview
The FOX 985-24-201 is a 2.0 Performance Series smooth body IFP rear shock for the 2014-2026 Ram 2500. The gas charged monotube shock has a 2.0 inch body diameter, a stem top mount and an eyelet bottom mount.
The Performance Series 2.0 IFP shocks use damping control designed for a comfortable on-road ride and predictable off-road handling. The Internal Floating Piston design separates the shock oil from the high-pressure nitrogen gas chamber, which helps prevent oil aeration.
Check the existing shock’s length against this one before ordering.
Key features
- Smooth body 2.0 Performance Series IFP shock
- Monotube design
- Gas charged
- 2.0 inch body diameter
- Stem top mount and eyelet bottom mount
- Rear position
- The aluminum body resists rust.
- Internal Floating Piston separates shock oil from the nitrogen gas chamber
Monotube shock care
A monotube shock keeps its damping oil and gas in one cylinder, and a floating piston keeps the gas separate from the oil. Over time the seals, bushings and gas charge wear, and a shock that has lost control will feel bouncy on rough pavement or fail to settle after a bump.
Check the shock before replacing other suspension parts: look for oil on the body, a dented shaft, worn stem or eyelet bushings, and clunks at the mount. Replacing shocks in axle pairs keeps the ride even. After a new shock, check ride height and alignment if the suspension was disturbed, and re-tighten the mount hardware after the first drives.
- Oil seepage on the body points to a failed seal
- Worn eyelet bushings cause clunks on rough roads
- Dented shafts can damage the seal and need replacing
Specifications
| Brand | FOX |
|---|---|
| Part number | 985-24-201 |
| Catalog part number | FOX985-24-201 |
| Product type | Shock absorber |
| Series | 2.0 Performance Series |
| Body style | Smooth body, IFP |
| Shock type | Monotube |
| Body diameter | 2.0 in |
| Top mount | Stem top |
| Bottom mount | Eyelet |
| Location | Rear |
| Hydraulic / gas charged | Gas charged |
| Fit type | Direct fit |
Vehicle fitment
The stored manufacturer fitment list for the FOX 985-24-201 covers the 2014-2026 Ram 2500 in Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Limited Longhorn, Lone Star, Outdoorsman, Power Wagon, SLT and Tradesman trims.
The list covers the Ram 2500 only, from 2014 to 2026. Other Ram models and earlier Ram 2500 years are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Shocks control wheel movement and vehicle stability, so professional installation is recommended. Support the vehicle on jack stands rather than a jack alone, and torque mounting hardware to the specified values.
Re-check the hardware after the first miles of driving. Replace shocks in axle pairs where the manufacturer advises it, and have the alignment and ride height checked after any suspension work.
Before installing, compare the part number on the package with 985-24-201 and check that all parts are present. Work on level ground, wear eye protection, and keep the installation instructions for reference.
What’s included
One rear shock. Check the package contents against your installation before starting, including mounting hardware.









