Overview
The FOX 2.0 Performance Series Smooth Body IFP Shock, part 985-24-083, is a gas charged direct replacement shock. It bolts on in place of the factory unit.
FOX engineers test each direct replacement shock to maximize suspension travel and performance on and off the road. These shocks are made for applications from stock to lifted, and as aftermarket kit replacements.
It uses an internal floating piston (IFP) that keeps the shock oil and gas charge separate.
Key features
- Direct replacement bolt-on shock
- Gas charged
- IFP, internal floating piston design
- Smooth body
- Tested by FOX engineers for travel and performance
Gas charged shock basics
A gas charged shock uses a pressurized charge that keeps the oil from foaming during repeated compression. The internal floating piston sits between the oil and gas, so the two stay apart even when the shock is mounted at an angle. This separation is useful for trail use, where the shock cycles hard and heats up over time.
Before swapping a shock, inspect the mounts, bushings and the rubber parts at each eye. Compare the extended and compressed lengths against the old shock so travel stays in range, and check the bump stops for clearance. Smooth body designs are easier to clean, which makes it simpler to spot oil seepage early.
- Check eye bushings for splits or play
- Compare extended and compressed lengths before fitting
- Look for an oil film on the body after rough runs
Specifications
| Brand | FOX |
|---|---|
| Part number | 985-24-083 |
| Series | 2.0 Performance Series |
| Body | Smooth body |
| Design | IFP, internal floating piston |
| Charge | Gas charged |
Vehicle fitment
It is a universal fit. Check the shock’s length, eye sizes and mounting against your vehicle, and verify its year, model and trim before ordering.
Check the shock’s length, eye sizes and mounting against your vehicle before ordering. Confirm your vehicle’s year, model and trim before ordering.









