Overview
The FOX985-02-015 is a front Performance Series 2.0 coil-over IFP shock for the 2014 to 2020 Ford F-150. It fits FX2, FX4, King Ranch, Lariat, Limited, Platinum, Police Responder, Raptor, SSV, STX, SVT Raptor, XL and XLT models.
It bolts on with no modifications and is made for both stock and lifted trucks. The metal impact extruded aluminum body helps with cooling and corrosion resistance. The vehicle-specific upper mount uses a composite bushing to isolate noise and vibration.
Locking spring preload rings let you set ride height and preload. The coil is a racing-style spring selected for its spring rate, and the design levels the truck from front to rear.
An internal reservoir holds the internal floating piston, which separates the shock oil from the nitrogen-charged gas chamber. This keeps the oil from aerating, so the factory-tuned valving works as designed, giving a comfortable on-road ride with steady off-road handling.
Key features
- Front coil-over design that bolts on
- Locking spring preload rings for ride height and preload adjustment
- Racing coil spring selected for its spring rate
- Vehicle-specific upper mount with composite bushing
- Aluminum body for cooling and corrosion resistance
- IFP design with a nitrogen-charged gas chamber
Setting ride height
Ride height on a coilover is set by the spring preload rings, and the change shows up at the front corners first. Turn each side in small, even steps and measure before and after every adjustment, so the truck sits level and both sides carry the same load. Uneven settings can cause the front tires to wear on one edge and make steering feel off-center.
Preload and ride height also affect the upper mount and the spring itself. Lifting or lowering the front changes caster and camber, which is why an alignment check belongs in the setup process. Heavier loads and larger tires make the setting more noticeable, so recheck it after the first few trips.
- Measure both sides at the same point before and after adjusting
- Keep the preload rings locked once the height is set
- Re-check upper mount nuts after the first drive
Specifications
| Brand | FOX |
|---|---|
| Part number | FOX985-02-015 |
| Series | 2.0 Performance Series Coilover IFP |
| Position | Front |
| Shock type | Coilover, IFP mono-tube |
| Body | Metal impact extruded aluminum |
| Upper mount | Vehicle-specific, composite bushing |
| Adjustment | Locking spring preload rings |
| Gas chamber | Nitrogen-charged |
| Application | Stock or lifted trucks, re-uses the stock shock (per FOX) |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2014 to 2020 Ford F-150 in FX2, FX4, King Ranch, Lariat, Limited, Platinum, Police Responder, Raptor, SSV, STX, SVT Raptor, XL and XLT models.
The list covers 2014 to 2020 F-150 models only, so 2009 to 2013 and 2021 trucks are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Stock-truck applications re-use the stock shock, so confirm which application your truck needs before ordering. Set ride height and preload with the locking rings, then have the alignment checked. Work on a securely supported vehicle.
What’s included
One coil-over IFP shock. Check the package contents against your installation before starting.









