Overview
The Fabtech FTS722 is a U-bolt kit, part number FTS722, for clamping an axle to its springs. The kit holds four U-bolts with eight Nylock tall nuts and eight thick flat washers.
This kit is Direct Fit with no vehicle named. Verify the year, make, model and trim for your application before choosing the FTS722.
Key features
- Four U-bolts
- Eight Nylock tall nuts
- Eight thick flat washers
Working with U-bolt kits
A U-bolt kit is a clamp system rather than a suspension upgrade. It holds the axle to the springs or a block, so its job is to keep the axle in place under load. Each piece has to be correct for the tube diameter and the spring setup in use.
Inspect the old clamp set before reusing any part. Look for stretched or bent U-bolts, rounded nut threads, cracked or flattened washers, and rust that has pitted the surfaces. Clean the threads and check that the axle seat is square. Retighten after the first drives and at routine service.
Hardware choice matters when the clamp is loaded heavily or used off road. Matching grade and plating to the environment helps resist corrosion, and keeping nut tightness consistent reduces the chance of loosening during rough driving.
- Check for stretched U-bolts
- Replace rounded nuts
- Clean threads before assembly
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS722 |
| UPC | 674866004757 |
| U-bolts | Four |
| Nuts | Eight Nylock tall nuts |
| Washers | Eight thick flat washers |
Vehicle fitment
Fit is not confirmed for any year or chassis code. Check your year, model and trim before you order.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The FTS722 package lists four U-bolts, eight Nylock tall nuts and eight thick flat washers. No lift blocks are listed.





