Overview
The Fabtech FTS744 is a U-bolt kit, part number FTS744, that fastens an axle to its springs or suspension block. Eight Nylock tall nuts, eight thick flat washers and four U-bolts come in the box. Fabtech labels the kit Universal Fit, so it is not matched to one vehicle; axle tube size and spring pack dimensions decide whether it works.
Choosing U-bolt hardware
U-bolt hardware is sized by the diameter of the axle tube and the thickness of the spring pack it clamps. The U-bolt has to wrap the tube and pass through the spring or block with enough thread length for the nuts to seat fully. A shorter or longer bolt than needed will not clamp evenly.
Tall Nylock nuts are used because the nylon insert resists loosening from vibration. Thick flat washers spread clamp load so the spring or plate is not crushed. Inspect the threads and washers before fitting, and replace any that show rust, rounding or flattening, since weakened hardware is a common cause of loose clamps.
- Measure the axle tube diameter
- Check spring pack thickness before ordering
- Replace rounded or rusted nuts
- Recheck nut tightness after the first drives
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS744 |
| UPC | 67486601603 |
| Included hardware | Four U-bolts with eight tall Nylock nuts and eight thick washers |
| Sold as | Kit |
Vehicle fitment
Labeled Universal Fit, the FTS744 is a general label rather than a match for any year, make or model. Confirm fit for your vehicle’s year, model and trim before ordering.
Universal fit does not guarantee every axle or spring pack. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Fasteners in the box: four U-bolts plus eight tall Nylock nuts and eight flat washers.






