Overview
The Fabtech FTSBK54 is a block and U-bolt kit, part number FTSBK54. It includes two lift blocks with an integrated bump stop and is a direct fit.
The kit adds four U-bolts, eight Nylock tall nuts and eight thick flat washers to the two blocks, but no year, make or model is named.
Key features
- Two lift blocks
- Integrated bump stop
- Four U-bolts
- Eight Nylock tall nuts and eight thick flat washers
Before installing lift blocks
A lift block sits between the axle and the leaf springs or coil seat, raising the axle so the suspension can sit higher. The change in height also shifts the angles of the driveshafts and the pinion, which is why a block kit often calls for a driveline check. Bump stops limit how far the suspension can compress, so the integrated stop on this kit affects how the axle travels over rough ground.
U-bolts clamp the axle to the springs, so they carry most of the load through the block. Inspect the threads and bends before reuse, and replace any bolt that shows stretching, corrosion or rounding. Nylock nuts should be replaced once they lose their grip. After the first few drives, re-torque the nuts and recheck clearance at the brake lines and the shock mounts.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTSBK54 |
| UPC | 67486602258 |
| Fitment type | Direct fit |
| Lift blocks | Two |
| Bump stop | Integrated |
| Included hardware | Four U-bolts, eight Nylock tall nuts, eight thick flat washers |
Vehicle fitment
It is a direct fit for the FTSBK54. Match your year, model and trim before buying, and check axle and spring fit.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Lift blocks change ride height and can alter driveline angles, so have the alignment and driveline angles checked after the kit is installed.
What’s included
Two lift blocks with an integrated bump stop, four U-bolts, eight Nylock tall nuts and eight thick flat washers.





