Overview
The Fabtech FTS6002 is a rear Performance gas shock absorber for the 1987–1995 Jeep Wrangler (YJ), 1997–2006 Jeep Wrangler (TJ), 2004–2005 Jeep Wrangler (LJ) and selected 2007–2008 and 2012 Jeep Wrangler (JK) models. Its collapsed length is 27.1 in. and its extended length is 16.84 in.
The shock is a 2 inch monotube with a 9/16 inch chrome hardened piston rod and a high flow 9 stage valve design. It has a 5 in. lift setting, so confirm your suspension height matches before choosing this length.
Key features
- High flow 9 stage valving with closed cell foam insert
- 2 inch diameter monotube body with nitrogen gas charge
- 9/16 inch chrome hardened piston rod
- 1 3/8 inch OD piston
- White powdercoat finish with blue Fabtech logo and no reservoir
Signs the rear shock is worn
A shock that has lost damping lets the body bounce several times after a bump, and the rear may feel loose on washboard roads. Over time the rod can pit or bend from debris, and the seal can start to weep fluid. These signs develop gradually, so comparing the left and right rear by feel and sight helps spot a worn unit early.
When choosing a shock with a different length, consider the lift and tire size already on the vehicle. Longer travel shocks help on rough trails but need enough clearance to avoid contact at full extension. Replacing rear shocks in pairs keeps the axle controlled evenly on both sides, and it keeps the ride consistent over the next several seasons of use.
- Check for bounce after a single bump
- Look for leaking fluid or a dented body
- Inspect the rod for pitting or scoring
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FABFTS6002 |
| UPC | 674866015845 |
| Shock series | Performance Shock |
| Position | Rear |
| Shock body | 2 inch diameter monotube, nitrogen charged |
| Charge type | Hydraulic |
| Reservoir | No |
| Collapsed length | 27.1 in. |
| Extended length | 16.84 in. |
| Travel length | 10.26 in. |
| Lower mount | EB1 |
| Upper mount | EB1 |
| Piston rod | 9/16 inch chrome hardened |
| Piston OD | 1 3/8 inch |
| Valving | High flow 9 stage |
| Insert | Closed cell foam |
| Finish | White powdercoat with blue Fabtech logo |
| Lift height | 5 in. lift |
Vehicle fitment
It fits 1987–1995 Jeep Wrangler (YJ) in Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims, 2004–2005 Jeep Wrangler (LJ) in Unlimited and Unlimited Rubicon trims, 1997–2006 Jeep Wrangler (TJ) in 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims, and 2007–2008 and 2012 Jeep Wrangler (JK) in Rubicon, Sahara, Sport and Unlimited trims.
Wrangler JK years between the covered ones, the Wrangler JL and the Cherokee XJ are not covered by this fit. Compare your vehicle’s year, model and trim with the fit range before ordering.
What’s included
The item is the Fabtech Performance shock absorber, part number FABFTS6002.









