Overview
The Fabtech FTS7333 is a front performance twin tube shock absorber with a w/3.5 in. lift setting. Its vehicle fit is unconfirmed, so verify it against your truck before buying.
The hydraulic body is 2.38 inch in diameter and houses a 9/16 inch chrome hardened piston rod and a 1 3/8 inch OD piston. High flow 9 stage valving and a closed cell foam insert make up the damping setup, which Fabtech says is meant to reduce shock fade at high speeds.
Key features
- Front position performance shock
- Hydraulic twin tube body, 2.38 inch diameter
- High flow 9 stage valving
- Closed cell foam insert
- 9/16 inch chrome hardened piston rod
- White powdercoat finish with blue Fabtech logo
Matching shock length to the truck
Shock length is the first thing to check, because a shock that is too long or short will limit suspension travel or bind at full droop. Compare the collapsed and extended measurements of the shock being removed with the new unit before ordering. Small differences can change how the truck sits and how the damper works through its stroke.
Mount style matters as well. Eye-to-eye bushings and stud mounts are not interchangeable, so an adapter or a different bushing set may be needed. Ask whether replacement bushings come with the shock, and keep the old mounting hardware until the new unit is confirmed to fit.
- Measure the old shock with the suspension at ride height
- Inspect the upper mount for cracks before reuse
- Torque mounting bolts to the vehicle’s service level after the first drive
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS7333 |
| UPC | 674866000148 |
| Shock series | Performance Shock |
| Position | Front |
| Fitment type | Direct fit |
| Lift height | w/3.5 in. lift |
| Collapsed length | 28.45 in. |
| Extended length | 16.67 in. |
| Travel length | 11.78 in. |
| Lower mount | EB1 |
| Upper mount | EB1 |
| Reservoir | No |
| Shock body | 2.38 inch diameter twin tube hydraulic |
| Piston rod | 9/16 inch chrome hardened |
| Piston | 1 3/8 inch OD |
| Valving | High flow 9 stage |
| Insert | Closed cell foam |
| Finish | White powdercoat with blue Fabtech logo |
| Hydraulic / gas charged | Hydraulic |
Vehicle fitment
Vehicle years, models and chassis codes are unconfirmed for the FTS7333. Confirm fit for your truck’s year, model and trim before buying, and compare the 28.45 in. collapsed length with your current front shock.
Compare the 28.45 in. collapsed length with your current front shock. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure your current front shock and compare its lengths with 28.45 in. collapsed and 16.67 in. extended before fitting. Support the front suspension on stands before disconnecting the existing shock.
What’s included
Included hardware is unknown for the FTS7333. Check the package contents against your installation before starting.








