Overview
The Fabtech FABFTS22341 is a rear Dirt Logic 2.5 reservoir coilover shock for the 2021 and 2022 Ford Bronco. It fits seven Bronco trims, including Badlands, Outer Banks and Wildtrak.
The Dirt Logic 2.5 coilover has a stainless steel body built for severe conditions. Its billet aluminum reservoir dissipates heat to reduce shock fade, and the aluminum parts are polished and anodized.
This is a rear position unit. Compare spring rate, damping and length with the original rear setup before ordering.
Key features
- Rear position
- Stainless steel body
- Billet aluminum reservoir
- Reduced shock fade from heat dissipation
- Polished and anodized aluminum parts
Rear coilover setup
A rear coilover controls axle movement and holds the body steady when the rear wheels drop into ruts. Because the spring and damper are a matched unit, changing the shock often means changing the spring as well. A stainless body helps resist road salt and mud, which are common causes of corrosion on rear suspension parts.
When fitting a rear coilover, check that the mounts clear the frame, body and brake lines through full travel. Inspect the rear bushings and axle brackets at the same time, since worn parts change how the coilover loads. Recheck torque on all fasteners after the first few drives on rough ground.
- Check clearance through full travel
- Inspect rear bushings and brackets
- Recheck fastener torque after first drives
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FABFTS22341 |
| Series | 2.5 Dirt Logic |
| Location | Rear |
| Shock type | Coilover reservoir |
| Body | Stainless steel |
| Reservoir | Billet aluminum |
| Finish | Polished and anodized aluminum parts |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2021 and 2022 Ford Bronco in Badlands, Base, Big Bend, Black Diamond, First Edition, Outer Banks and Wildtrak models.
The list covers only 2021 and 2022 Bronco models, and only the rear position. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The spring and damper are matched as one coilover unit, so compare the mounts and overall length with the original rear setup before fitting. Work on a securely supported vehicle.
What’s included
One rear coilover reservoir shock. Check the package contents, including any spring, against your installation before starting.













