Overview
The Fabtech FTS7174 is a front Performance twin tube hydraulic shock absorber with a 12.16 in. travel length and a 6 – 8 in. lift range. Check fit for your vehicle’s year, model and trim before ordering.
The collapsed length is 28.78 in. and the extended length is 16.62 in. The shock body is 2.38 inch diameter, with S1 lower and BP4 upper mounts. Inside, a 1 3/8 inch piston rides on a 9/16 inch chrome hardened piston rod, with a closed cell foam insert and high flow 9 stage valving.
Key features
- Front position with a 6 – 8 in. lift range
- 12.16 in. travel length
- 2.38 inch diameter twin tube hydraulic body
- High flow 9 stage valving with closed cell foam insert
- 9/16 inch chrome hardened piston rod
Checking fit before installation
Before a shock is installed, the most important step is confirming that its length, mount style and body diameter match the suspension on your vehicle. Measure the existing shock from eye to eye when it is compressed and when it is extended, and compare those figures with the collapsed and extended measurements for this part. A shock that is close in length may still be wrong if the mount ends do not line up.
Front shocks handle steering control and braking dive, so a poor match can affect handling as well as ride. Inspect the upper and lower bushings, the bolts that hold the shock and the bump stops before replacing the shock. A shock installed with worn mounts can loosen over time, so correct any play before driving the truck.
- Measure eye to eye on the old shock
- Compare mount ends before ordering
- Inspect bushings and bump stops
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS7174 |
| UPC | 674866010062 |
| Shock series | Performance |
| Position | Front |
| Shock body | 2.38 inch diameter twin tube hydraulic |
| Piston rod | 9/16 inch chrome hardened |
| Piston | 1 3/8 inch OD |
| Insert | Closed cell foam |
| Valving | High flow 9 stage |
| Collapsed length | 28.78 in. |
| Extended length | 16.62 in. |
| Travel length | 12.16 in. |
| Lower mount | S1 |
| Upper mount | BP4 |
| Reservoir | No |
| Finish | White powdercoat with blue Fabtech logo |
| Lift height | 6 – 8 in. lift |
Vehicle fitment
Before ordering, confirm the year, model and trim against your vehicle, and compare the collapsed and extended lengths with your existing shock.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because no vehicle is listed, compare the 28.78 in. collapsed and 16.62 in. extended lengths with your existing shock before fitting.
What’s included
One front shock absorber under part number FTS7174 is described. No hardware is stated.


















