Overview
The Tuff Country 62262 is a front SX6000 shock absorber with a hydraulic, cellular gas design, multi-stage valving and polyurethane bushings. It is set up for a 4 in. lift aft of axle. It covers Dodge Ram trucks, Ford Bronco and F-series models, Jeep Wrangler YJ and JK, and Toyota Tacoma and Tundra models from 1978 through 2014.
The Dodge Ram 1500 from 1994 to 2001 and Base Ram 2500 and 3500 models from 1994 to 2001 are listed. Ford Bronco entries run from 1978 to 1996 and the Bronco II from 1984 to 1990. The Toyota Tacoma runs from 2005 to 2014 and the Tundra from 2000 to 2014.
Key features
- Hydraulic, cellular gas design
- Multi-stage valving
- Polyurethane bushings
- Twin-tube body
- Front position in the specifications
- Lift note of 4 in. Lift Aft Of Axle
Confirming position before install
Position matters with shock absorbers because front and rear units are tuned for different loads and suspension geometry. Before installing, confirm which axle the unit is meant for, and check that the lift setup matches that position. A shock fitted to the wrong axle can change ride height and steering feel, and it can wear faster than expected.
Many trucks with a lift or added load carry extra weight, so damping and bushing condition play a bigger role in ride quality. Polyurethane bushings resist wear better than rubber, but they still need periodic inspection for cracking, and they can squeak when dry. Check mounting hardware after the first few drives and inspect the shock for leaks at the seal and body.
- Verify axle position before ordering
- Check front ride height after installation
- Look for seal leaks and body dents
Specifications
| Brand | Tuff Country |
|---|---|
| Part number | 62262 |
| UPC | 10698815622622 |
| Series | SX8000 (specifications field) |
| Position | Front |
| Design | Twin-tube, hydraulic, cellular gas |
| Valving | Multi-stage |
| Bushings | Polyurethane |
| Lift height note | w/4 in. Lift Aft Of Axle |
| Fitment type | Direct fit |
Vehicle fitment
Coverage runs from 1978 to 2014. Dodge models include the Ram 1500 from 1994 to 2001 in Base, LT, Laramie, ST and Sport trims, and the Base Ram 2500 and 3500 from 1994 to 2001. Ford models include the Bronco from 1978 to 1996, the Bronco II from 1984 to 1990, the F-150 for 1978 to 1979, the F-250 from 1980 to 1987, and the Super Duty F-250 and F-350 from 2005 to 2007. Jeep models include the Wrangler YJ from 1987 to 1995 and the Wrangler JK from 2007 to 2014. Toyota models include the Tacoma from 2005 to 2014 and the Tundra from 2000 to 2014.
The list does not include Ford F-150 models after 1979, Ford Super Duty trucks after 2007, or Dodge Ram 2500 and 3500 trucks after 2001. The position field says front, while the lift note mentions aft of axle, so confirm the position before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The lift note reads w/4 in. Lift Aft Of Axle, so match it to your suspension setup before installing. Check front ride height after installation to confirm the shock is set up as intended.
What’s included
One front SX6000 shock absorber, sold individually.
Not included: Check mounting hardware against your installation before starting.








