Overview
The Fabtech Dirt Logic 2.25 Shock Absorber FTS810152 is a rear monotube gas charged shock for a 6 in. lift on the 1999–2006 Chevrolet Silverado 1500 and GMC Sierra 1500, including the 2007 Classic models and the 1999 K1500. It is listed in stainless steel.
The Dirt Logic 2.25 is a large diameter monotube gas charged shock for lifted trucks. It mounts in the OE mounting position as well as in multiple shock configurations. This part is offered with or without a reservoir and in blue or black anodized finishes.
Key features
- Dirt Logic 2.25 monotube design
- Gas charged
- Stainless steel
- Rear position
- For a 6 in. lift
- Mounts in the OE mounting
- Designed for large diameter shock use on lifted vehicles.
Before you buy
A large diameter rear shock changes how the rear axle is controlled once the truck is lifted, so the shock length, mount style and travel should match the lift. Gas charged monotube designs keep the fluid and gas separated from the piston, which helps reduce foaming during long runs over rough ground. Rear shocks are often replaced in pairs so both sides damp the same way.
Before fitting, look at the brake lines, the fuel and wiring routing, and the bump stops near the axle. A lifted rear end can change how these parts move through full travel. Keeping the bump stops and mounting bushings in good shape helps the shock do its job without bottoming out.
- Check the mounting bushings for cracks or wear
- Confirm the rear brake lines have slack at full droop
- Plan to replace both rear shocks together
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS810152 |
| UPC | 674866094840 |
| Product type | Shock absorber (Dirt Logic 2.25) |
| Position | Rear |
| Lift height | 6 in. lift |
| Design | Monotube |
| Gas or hydraulic | Gas charged |
| Material | Stainless steel |
| Mounting | OE mounting |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1999 Chevrolet K1500 (LS), the 1999–2006 Chevrolet Silverado 1500 (Base, LS, LT, WT, Z71), the 2007 Chevrolet Silverado 1500 Classic (LS, LT, WT), the 1999 GMC K1500 (Sierra SL, SLE, SLT), the 1999–2006 GMC Sierra 1500 (Base, HT, SL, SLE, SLT, WT) and the 2007 GMC Sierra 1500 Classic (SL, SLE, SLT, WT).
Redesigned 2007 and later models, and 2500 and 3500 HD trucks, are not covered. This is a rear shock for a 6 in. lift. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Tighten all fasteners to the torque values in your installation instructions. Support the vehicle on jack stands or a lift on level ground, never on a jack alone, and re-check fastener tightness after the first miles of driving.
Suspension work changes ride height, steering geometry and brake line and driveline clearances, so professional installation is recommended, and a wheel alignment is advised afterward. Check your local regulations on vehicle lift height and equipment.
Shocks are normally replaced in pairs, so plan for two rear shocks, and check brake lines and wiring for slack through full suspension travel.
What’s included
One rear shock absorber.
Not included: Front shocks, bushings and other hardware are not included. Check the package contents against your installation before starting.








