Overview
The FTS2300K is a basic coil over kit for the front of 1995–2004 Toyota 4Runner and 1995–2004 Toyota Tacoma trucks. It is a direct fit with a lift range of 0 to 2 in.
The kit combines gas charged shocks with coil springs and the hardware needed to assemble them. Fabtech says its shocks use high velocity 9-stage valving and a closed cell insert to reduce shock fade at high speeds, and the kit is non rebuildable.
Key features
- Gas charged shock design
- High velocity 9-stage valving
- Closed cell insert that reduces shock fade at high speeds
- Lift range 0 to 2 in.
Setting up a coil over kit
A basic coil over kit gives you the spring and shock assembly together, which simplifies a front height change compared with mixing parts from different sources. Keep the included hardware organized during assembly so nothing is missed. Kits of this type rely on correct preload to set height and balance. The spanner wrench helps with that adjustment, and working both sides evenly keeps the truck level.
Once the kit is installed, check ride height at both front corners after the first drive, since springs can settle slightly. Inspect the upper mounts and bushings for wear, and keep an eye on the shock bodies for seepage. Front alignment should be checked after the height changes, and any other front-end parts showing wear should be addressed at the same time.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS2300K |
| UPC | 674866007284 |
| Position | Front |
| Fitment type | Direct fit |
| Lift height | 0 to 2 in. |
| Hydraulic or gas charged | Gas charged |
| Rebuildable | No |
Vehicle fitment
It fits the 1995–2004 Toyota 4Runner in Base, Limited, SR5 and Sport trims, and the 1995–2004 Toyota Tacoma in Base, Limited, Pre Runner and SR5 trims.
Tundra models and Tacoma model years outside 1995–2004 are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The included spanner wrench is the tool for setting spring preload on a coil over, so set both sides evenly. Have front alignment checked after installation.
What’s included
The kit includes shocks, springs, insulators, screws, washers, nuts, sleeves, snap rings and a spanner wrench.







