Overview
The Fabtech Dirt Logic 2.5 Coil Over Shock Absorber, part number FTS21177, is a front coil-over shock with a reservoir for a 6 in. lift. It is a gas charged design from Fabtech’s Dirt Logic 2.5 shock series.
The coil-over format combines the shock and spring at the front. It is used with Fabtech part numbers K1112DL, K1114DL and K1115DL. Check those parts against your build before ordering.
Key features
- Coil-over format for a front position with a 6 in. lift
- Reservoir version, shown as w/Resi
- Gas charged construction
- Dirt Logic 2.5 shock series from Fabtech
Coil-over lift planning
A coil-over combines the spring and damper, so changing ride height often means changing spring length or preload along with the shock. Coil-over setups can improve control on rough terrain, but the lift height, spring rate and shock length need to work together. Check the front geometry after installation, since a lift changes the angles of the steering and axle links.
Front coil-overs are often replaced with other lift parts, such as control arms, sway bar links and brake lines. Plan the job around the whole kit rather than one piece, and recheck torque on fasteners after the first few drives. Look at shock boots and reservoir hoses regularly, because they are the first place wear shows up on an off road front end.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS21177 |
| UPC | 674866099128 |
| Shock series | Dirt Logic 2.5 |
| Shock type | Coil-over |
| Gas charge | Gas charged |
| Mounting position | Front |
| Lift height | 6 in. |
| Reservoir | With reservoir |
| Referenced part numbers | K1112DL, K1114DL, K1115DL |
Vehicle fitment
Fit depends on your vehicle’s year, model and trim, so check that first before ordering. The 6 in. lift is the fit-related figure to plan around.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm that the referenced kit parts match this coil-over before installation, because the 6 in. lift depends on that pairing.
What’s included
The package is the coil-over shock with reservoir.
Not included: Check the contents of the kit against part numbers K1112DL, K1114DL and K1115DL before installing.








