Overview
The Fabtech FTS7335 is a Performance Twin Tube shock absorber, part number FTS7335, designed to work with Fabtech suspension systems for better control and ride. It is a hydraulic shock with a 2.38 in twin tube body, an EB1 lower mount and an ES34 upper mount.
The high velocity 9-stage valving and closed cell foam insert are designed for dampening control and to help reduce shock fade at high speeds. Confirm the application for your vehicle’s year, model and trim before choosing this shock.
Key features
- Twin tube hydraulic body with a 2.38 in diameter
- High velocity 9-stage high flow valving
- Closed cell foam insert to help reduce shock fade at high speeds
- 9/16 inch chrome hardened piston rod and 1 3/8 inch OD piston
- No reservoir, with a white powdercoat finish and blue Fabtech logo
Front and rear shock pairing
Shocks do their best work when the front and rear units are matched in design and mounting style. A high velocity valving setup helps control fast impacts, while a closed cell foam insert is meant to reduce heat fade on long, hard runs. Pairing the shock with the correct rear unit keeps the vehicle balanced over washboard and whoops.
The upper ES34 mount and lower EB1 mount need to line up with the bracket and bushing on the vehicle, and any worn sway bar link or control arm bushing should be replaced before the shock goes in. Measuring the installed length at both ends of travel helps catch clearance problems early. A shock that runs against the tire or frame will wear quickly.
- Match front and rear shocks in style
- Inspect sway bar links and control arm bushings
- Check tire clearance across full travel
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS7335 |
| UPC | 674866000155 |
| Shock type | Performance twin tube, hydraulic |
| Body diameter | 2.38 in |
| Collapsed length | 29.98 in |
| Extended length | 17.58 in |
| Travel length | 12.4 in |
| Lower mount | EB1 |
| Upper mount | ES34 |
| Reservoir | No |
| Piston rod | 9/16 inch chrome hardened |
| Piston outside diameter | 1 3/8 inch |
| Valving | High flow 9-stage |
| Insert | Closed cell foam |
| Finish | White powdercoat with blue Fabtech logo |
Vehicle fitment
Verify the year, model and trim of the vehicle before purchase. The shock is designed to work with Fabtech suspension systems.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare your installed length with the 29.98 in collapsed and 17.58 in extended measurements before choosing this shock. Fabtech lists EB1 lower and ES34 upper mount codes, so check that your mounting hardware matches them.
What’s included
Only the shock absorber is described. No hardware or bushings are listed.



















