Overview
The Fabtech FTS811092 is a Dirt Logic 2.25 SS front shock for the 2007-2015 Jeep Wrangler (JK) with a 3 in. lift. It is a gas charged shock with a 2.25 inch OD stainless steel body, a 2.0 inch OD billet aluminum piston and a 7/8 inch NitroSteel black piston rod.
This monotube gas charged shock is a large diameter design for lifted vehicles. It mounts in the OE position and in several shock configurations.
Key features
- 2.25 inch OD stainless steel body
- 2.0 inch OD billet aluminum piston
- 7/8 inch NitroSteel black piston rod
- Polyurethane mounting ends
- Non-reservoir design
- Gas charged monotube
- Front position
- Designed for a 3 in. lift
Care and inspection of monotubes
Monotube gas charged shocks keep the gas and oil in one tube, which helps them resist overheating during repeated trail use. Larger bodies and pistons are generally chosen for heavier, off-road use. Non-reservoir designs mount more compactly, so check that the shock clears the frame and crossmember at full compression.
Gas charged shocks should be inspected for seepage around the shaft seal and for scoring on the exposed rod. Dirt and grit can wear the seal over time, so wiping the rod after mud runs helps. Polyurethane mounting ends can crack or compress with age and are worth checking at the same time as the shock.
- Check the rod for scoring or pitting
- Look for an oil film on the shock body
- Inspect polyurethane ends for cracking
- Confirm clearance at full compression
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS811092 |
| Catalog part number | FABFTS811092 |
| UPC | 674866093881 |
| Product type | Shock absorber |
| Series | Dirt Logic 2.25 SS |
| Position | Front |
| Body | 2.25 inch OD stainless steel |
| Piston | 2.0 inch OD billet aluminum |
| Piston rod | 7/8 inch NitroSteel, black |
| Mounting ends | Polyurethane |
| Reservoir | Non-reservoir |
| Hydraulic / gas charged | Gas charged |
| Lift height | w/3 in. lift |
| Fit type | Direct fit |
Vehicle fitment
The stored manufacturer fitment list for the Fabtech FTS811092 covers the 2007-2015 Jeep Wrangler (JK), including 70th Anniversary, Rubicon, Sahara, Sport, X and Unlimited trims (Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited X).
It covers 2007-2015 Jeep Wrangler JK models. JK Wranglers from 2016 on, along with the TJ, LJ and JL, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Shocks control wheel movement and vehicle stability, so professional installation is recommended. Support the vehicle on jack stands rather than a jack alone, and torque mounting hardware to the specification for your vehicle.
Re-check the hardware after the first miles of driving. Replace shocks in axle pairs where the manufacturer advises it, and have the alignment and ride height checked after any suspension work.
What’s included
One front shock. Check the package contents against your installation before starting, including mounting hardware.








