Overview
The Rancho RS55762 is a front RS5000X Series suspension strut assembly for the 1996–2000 Toyota 4Runner and the 1995–2004 Toyota Tacoma. It is a direct fit shock built around a patented rebound valving system and an advanced compression phase.
It is designed to improve handling and performance on and off road. The strut uses an enlarged twin tube body with gas pressurization, a progressive engagement valve, a tuned compression control valve and a 16 mm nitro carburized rod. Compare these construction details with your current strut before ordering.
Key features
- Progressive engagement valving and a tuned compression control valve
- Enlarged twin tube body with gas pressurization
- 16 mm nitro carburized rod
- 35 mm full displaced bore
- Rebound bumper
- Low-friction, self-lubricating seal
- Glass-filled, Fluon-banded piston
- Black natural bushings and double welded loops
- Protective boot
Strut versus shock: what changes
A strut is a structural part. Beyond damping, it carries the spring load and helps locate the front wheel, so it plays a role in alignment and steering geometry. A shock-only unit leaves the spring and upper mounts in place, while a complete strut assembly replaces more of the front suspension at once.
On Toyota trucks, the front strut is exposed to road debris and repeated loading. Wear in the upper mount or bearing can cause clunks and uneven tire wear even when the damping is still good. Inspecting the whole assembly, not only the damper, helps prevent a repeat repair.
- Check the upper mount for play or noise
- Look for fluid on the strut body
- Inspect the boot for cracks or tears
- Re-check the mounting bolts after the first few drives
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS55762 |
| UPC | 39703008013 |
| Product line | RS5000X Series |
| Position | Front |
| Fitment type | Direct fit |
| Rod | 16 mm, nitro carburized |
| Bore | 35 mm, full displaced |
| Body | Enlarged twin tube, gas pressurized |
| Valving | Progressive engagement; tuned compression control valve |
| Piston | Glass-filled, Fluon-banded |
| Seal | Low friction, self-lubricating |
| Bushings | Black natural |
| Loops | Double welded |
| Rebound and boot | Rebound bumper; protective boot |
Vehicle fitment
It is the front strut for these model years and trims: 1996–2000 Toyota 4Runner (Base), and 1995–2004 Toyota Tacoma (Base, Limited, Pre Runner, S-Runner and SR5).
Later 4Runner years and Tacoma years after 2004 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
This is the front RS5000X Series strut assembly, part number RS55762. Check the package contents, including any mounting parts, against your installation before starting.












