Overview
The Moog K8771T is a press-in front lower ball joint, part number MOGK8771T, for the Mazda B-Series pickup. It fits the 2001–2009 Mazda B2300, the 1998–2001 Mazda B2500, the 1998–2007 Mazda B3000 and the 1998–2003 Mazda B4000.
Each B-Series model is covered across the 1998 to 2009 range. The joint has a hardened ball stud, a dust boot with an encapsulated Belleville washer and a forged housing. The greasable socket lets fresh lubricant flush contaminants out, and the pre-tapped grease fitting hole allows service with the joint in place.
Key features
- Press-in type that is pressed into the knuckle
- Hardened ball stud for higher loads
- Patent-pending dust boot with an encapsulated Belleville washer
- Forged housing with up to 52% more material in key areas
- Greasable socket that lets new lubricant flush contaminants out
Pickup front suspension upkeep
Mazda B-Series pickups use a body-on-frame layout, so the lower ball joint carries the wheel’s pivot and a share of the front end weight over every bump. Over years of use the joint can develop play that shows up as wandering, a knock over rough pavement or uneven tire wear. Checking the boot and the wheel’s movement at the top and bottom is a simple first inspection.
Older pickups often have several front suspension parts nearing the end of their life together. Tie rods, control arm bushings and the upper joint are worth checking while the lower joint is out. Keeping the grease fitting serviced and inspecting the boot after deep water crossings helps the joint last, and a press-in replacement should be followed by an alignment.
Specifications
| Brand | Moog |
|---|---|
| Part number | MOGK8771T |
| Position | Front lower |
| Joint type | Press-in |
| Lubeable | Yes |
| Housing | Forged, with up to 52% more material in key areas |
Vehicle fitment
It fits the 2001–2009 Mazda B2300, the 1998–2001 Mazda B2500 (including the Troy Lee version), the 1998–2007 Mazda B3000 and the 1998–2003 Mazda B4000.
Mazda B-Series years outside those ranges, and other Mazda trucks, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
As a press-in part, it has to be pressed into the knuckle, so the installer needs a press or the right tools. Greasing after installation is supported by the grease fitting hole.
What’s included
One Moog front lower ball joint, part MOGK8771T, for the Mazda B-Series application named above.










