Overview
The Fabtech FTS291 is a front alignment cam for the Ford Ranger from 1998 to 2008. Alignment cams adjust the caster and camber angles of the front suspension, and this one is sold as a set.
It fits the 1998 to 2008 Ford Ranger, covering 2WD models. The range runs through 2008, so confirm your vehicle’s year, model and trim before ordering.
Key features
- Front position alignment cam
- Sold as a set
- Covers 2WD models
- Direct fit for the Ford Ranger
Ranger alignment after installation
A Ranger front end is sensitive to small changes, so cams are a practical way to bring caster and camber back into range after wear or a lift. Because they shift the upper arm, the adjustment affects tire wear, tracking and steering return. Mark the stock positions before loosening anything so you have a reference point.
Worn ball joints, control arm bushings and tie rod ends can make an alignment hard to hold, so inspect them before setting the cams. Use a shop with a full alignment rack, and recheck toe after the first few drives. Tire pressure and tread wear also show early signs of an off setting. Drivetrain changes such as a different axle can alter the angles too, so confirm the setup after any driveline work.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS291 |
| UPC | 674866011519 |
| Position | Front |
| Fitment type | Direct fit |
| Quantity | Set |
| Drivetrain | 2WD models |
Vehicle fitment
The manufacturer fitment list covers the 1998–2008 Ford Ranger (EV, Edge, STX, Splash, Sport, Tremor, XL, XLT).
The range runs through 2008. Confirm your vehicle’s year, model, trim and drivetrain before ordering.
Installation notes
A front wheel alignment check is needed once the cams are set.
What’s included
One alignment cam set. Check the package contents against your installation before starting.







