Overview
The Moog camber bolt kit is a steering and suspension kit for the 2007 to 2016 Jeep Wrangler JK, including Rubicon and Unlimited models, in both 2-door and 4-door form. A camber bolt adjusts the wheel’s inward or outward tilt at the mounting point, which is why it is used during an alignment to set camber.
The kit has a powdered metal gusher bearing that routes grease through the bearing to the stud, a patented cover plate designed for tighter tolerances, and a full ball metal stud that rotates through 360 degrees. Patent pending Sunoloy coated bearings support smooth stud swing.
Key features
- Powdered metal gusher bearing design that routes grease through the bearing to the stud.
- Patented cover plate design that MOOG says allows tighter tolerances
- Full ball metal stud, which MOOG says rotates through 360 degrees
- Patent pending Sunoloy coated metal bearings for smooth stud swing.
- Direct fit for the listed Wrangler JK models.
Front end wear and camber settings
Camber affects how evenly the tire tread wears. Too much inward or outward tilt wears one shoulder of the tire faster than the other, so a camber bolt kit is often used when a JK’s wheels drift out of specification. Before adjusting camber, check the ball joints, control arm bushings and tie rod ends, since loose joints can make an alignment impossible to hold.
Off-road use and larger tires put extra load on the front suspension, so camber can wear more quickly on a modified JK. Check the setting after hard trail use and after any lift or steering change, because those changes move the geometry the bolts work against.
- Inspect tires for inner or outer edge wear
- Check ball joints and tie rod ends for play
- Re-check the alignment after the first few trail runs
Specifications
| Brand | Moog |
|---|---|
| UPC | 80066013039 |
| Product type | Camber bolt kit |
| Fits | 2007 to 2016 Jeep Wrangler JK; 2-door and 4-door |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2007 to 2016 Jeep Wrangler JK, including Rubicon and Unlimited models, in 2-door and 4-door form. Other Wrangler years and generations, such as the 1997 to 2006 TJ or the 2018 JL, fall outside this fit. Match your vehicle’s year and model before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A camber bolt kit changes the camber setting, so the front end should be aligned after installation. The work usually runs through a shop with alignment equipment, since the bolts are set to specification during the alignment.
What’s included
One camber bolt kit.
Not included: Check the number of bolts and any included hardware against your installation before starting.









