Select your vehicle
-13%

Rubicon Express Degree Cam Bolt Kit – RE1475

Rubicon Express

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear cam bolts for TJ upper arms
  • Adjusts pinion angle for driveline phasing
  • Usually 2 to 3 degrees of adjustment
  • Fits 1997-2006 Jeep Wrangler TJ

Description

Overview

The Rubicon Express RE1475 is a cam bolt kit for the rear upper control arms of the 1997 to 2006 Jeep Wrangler TJ. It adjusts pinion angle for proper driveline phasing, usually by 2 to 3 degrees.

It is a lower-cost option than adjustable upper control arms, and it is a direct fit for the TJ.

Key features

  • Rear cam bolts for TJ upper arms
  • Pinion angle adjustment for driveline phasing
  • Usually 2 to 3 degrees of adjustment
  • Direct fit for the TJ

Driveline angle basics

Pinion angle and driveshaft phasing work together, so changing one affects the other. Cam bolts make small adjustments at the upper arm mounts, which is useful when the angle is only slightly off after a lift. Because the adjustment range is limited, they are best suited to minor corrections rather than large changes in pinion angle.

Measure the driveline angles before and after the change, using a level or angle finder at the pinion and transfer case. Check the upper arm bushings and the axle housing for wear, since loose parts can shift the setting over time. Retighten the cam bolt hardware after the first few trail runs and recheck the angle after any suspension work.

  • Measure pinion angle at both ends of the driveshaft
  • Inspect upper arm bushings for play
  • Retorque cam bolt hardware after the first drives
  • Recheck alignment after suspension changes

Specifications

Brand Rubicon Express
Part number RE1475
UPC 614901438413
Position Rear upper control arms
Adjustment Usually 2 to 3 degrees
Fitment type Direct fit

Vehicle fitment

It fits the 1997 to 2006 Jeep Wrangler (TJ), in several trims.

The list covers the TJ only. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The cam bolts are used to adjust pinion angle at the rear upper arms, and they are the lower-cost option compared with adjustable upper control arms. Check the driveline angles after the adjustment is set.

What’s included

Rear cam bolts for the TJ upper arms.

SKU: R/ERE1475 Category:

Specification

Shipping weight 0.65 lbs
Package dimensions 4.50 × 3.00 × 1.50 in
brands

Fitment

VehicleYearsTrims
Jeep Wrangler (TJ)1997–200665th Anniversary Edition, Rubicon, SE, Sahara, Sport, X

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the RE1475 fit a 2002 Jeep Wrangler TJ?

Yes. It fits the 1997 to 2006 Wrangler TJ, so a 2002 TJ falls within that range. Confirm your vehicle's trim before ordering.

How much adjustment does it give?

The cam bolts usually give 2 to 3 degrees of pinion angle adjustment. Compared with adjustable upper control arms, they are a lower-cost way to set the angle, though with less range.

What is it used for?

It adjusts the pinion angle in the rear of a TJ for proper driveline phasing. It is designed for the rear upper arms only.

Should cam bolts be checked after off-road use?

Yes. Check the cam bolt hardware and the pinion angle after rough trail use, since impacts can shift the setting. Recheck the driveline angles whenever the upper arms, axle or lift height change.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon