Overview
The Fabtech K3086M is a Basic lift kit with rear Stealth monotube shocks for the 2019 to 2021 Ram 1500. Its lift height range is 4 to 5.5 inches, while the name carries a 6-inch figure. Confirm the lift height and front shock type before ordering.
The kit is aimed at Ram owners who want larger tires and wheels while keeping a stock-like ride. The factory suspension is relocated with heavy duty bolt-on bracketry. The design uses Fabtech’s IFS technology with extended length ductile iron steering knuckles, which Fabtech says keep the factory electronic stability control working.
Key features
- Basic system with rear Stealth monotube shocks
- IFS technology with extended length ductile iron steering knuckles
- Heavy duty 1/4-inch steel lower control arm crossmembers
- Integrated front differential skid plate
- Steel coil spring spacers that keep the factory coil springs
- Stealth monotube rear shocks
- Front shock: Dirt Logic 3.0 coilover
Before you buy
A basic lift on a half-ton truck changes the way the suspension and driveline work together, so the front and rear setup should be considered as one package. Raising the rear with spacers and a U-bolt block shifts pinion angle, which can cause driveline vibration if the angle is not checked. Front components that alter steering geometry also influence how the truck tracks, and an alignment is the usual final step.
Tire size is the other major decision. Larger tires increase load on steering and axle parts and often require trimming near the fender or inner wheel well. Shoppers who plan a bigger tire later should choose a setup that leaves room for that change, and should check whether the shock lengths still suit the new ride height.
- Check driveline angles after the rear spacers are installed
- Recheck brake line length once the suspension is raised
- Replace worn ball joints and tie rod ends before the lift goes in
- Inspect the factory bump stops for wear or damage
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FABK3086M |
| Lift height range | 4 to 5.5 inches; the product name shows 6 inches |
| Front shocks | Dirt Logic 3.0 coilover |
| Rear shocks | Stealth monotube |
| Rear lift component | Block and U-bolt |
| Lower control arm crossmembers | 1/4-inch steel |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2019 to 2021 Ram 1500 models in the Big Horn, HFE, Laramie, Laramie Longhorn, Limited, Limited Longhorn, Lone Star, Rebel, Special Service and Tradesman versions.
Ram 1500 models from years outside 2019 through 2021 are not covered. Match your truck’s year, model and trim to this kit before ordering.
Installation notes
The IFS parts and the bolt-on bracketry change front geometry, so a wheel alignment belongs after installation. Check driveline angles after the rear spacers are in place.
What’s included
The kit includes the bolt-on bracketry, the IFS components with extended length steering knuckles, the 1/4-inch steel crossmembers, the front differential skid plate and the rear Stealth monotube shocks.









