Overview
The Fabtech FTL5108 is a 1.5 inch front leveling kit for the 2015 to 2018 Chevrolet Colorado and GMC Canyon. The kit includes coil spacers and hardware, and it is finished in black.
The kit is engineered to eliminate ball joint, tie rod and steering bind. It carries a 5 year, 60,000 mile powertrain warranty, and tire and wheel combinations are covered for four sizes, each with minor trimming.
Key features
- 1.5 inch front lift
- Aircraft grade billet aluminum
- Coil spacers and hardware included
- Designed to eliminate ball joint, tie rod and steering bind.
- 5 year, 60,000 mile powertrain warranty
Checking the front end
A coil spacer raises the front by adding height above the spring, which keeps the stock spring and shock in place. This type of kit suits a truck that needs its front brought level with the rear, usually when the nose sits low or when added accessories have shifted the balance. Because the lift is modest, it is often paired with a check of tire size, since larger tires need more clearance once the front is raised.
Other parts commonly inspected during this job include the front shocks, sway bar links, ball joints and tie rod ends. Their wear can show up as clunks or uneven tire wear, and the new height puts them under a different angle. Torque the hardware to the values in your installation instructions and recheck it after the first drives. An alignment afterward keeps tire wear even and steering centered.
- Inspect front shocks and mounts before installing
- Look for worn sway bar links and ball joints
- Retorque bolts after the first few drives
- Recheck steering centering after alignment
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTL5108 |
| UPC | 674866098053 |
| Lift | 1.5 inches, front |
| Front lift method | Strut spacers |
| Finish | Black |
| Warranty | 5 year, 60,000 mile powertrain |
Vehicle fitment
It fits the 2015-2018 Chevrolet Colorado and the 2015-2018 GMC Canyon across the covered trim levels. Check that your year and trim fall within the covered range before buying.
Installation notes
Minor trimming is needed with the tire and wheel combinations, and an alignment is needed once the front is set.
What’s included
Included: coil spacers and hardware. Confirm the full hardware list with Fabtech.









