Overview
The Fabtech FTL5107 is a 2 inch front leveling kit for GM 1500 trucks and SUVs. It fits the 2007-2017 Chevrolet Silverado 1500, the 2016-2018 Chevrolet Tahoe, the 2016-2017 Chevrolet Suburban, the 2007-2018 GMC Sierra 1500, the 2019 GMC Sierra 1500 Limited and the 2016-2018 GMC Yukon XL.
The kit uses billet aluminum spacers that bolt in without removing the factory coilover shocks. The 2019 model year has different installation steps, so use the instructions that match your truck’s year.
Key features
- 2 inch front lift
- Spacers bolt in without disassembling the factory coilover shocks.
- 1/4 inch thick steel with high grade hardware
- Aircraft grade billet aluminum components
- Powder coated for corrosion resistance
- Engineered to eliminate ball joint, tie rod and steering bind.
Installing on a GM 1500
Billet aluminum spacers sit between the strut and the mounting point, so the front gains height without new shocks. The spacers are designed to reduce binding in the steering and ball joints when the front is raised. Because the front geometry changes, the installer should look at the steering linkage and the tie rods after the job is finished.
Work on a level surface and support the vehicle safely. Check that the spacers and hardware match the model year on the instructions. Before driving far, check the tire clearance at full steering lock, and make sure the brake lines and wiring have enough slack for the higher position.
- Match instructions to model year
- Check steering linkage after install
- Confirm tire clearance at full lock
- Schedule an alignment
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTL5107 |
| UPC | 674866090804 |
| Lift | 2 inches, front |
| Front lift method | Strut spacers |
| Finish | Black |
| Wheel backspace | 5 1/2 inch |
The kit uses the same parts as the early model GM 1500 kit, with new installation steps for the 2019 model.
Fabtech says kits shipped after August 28, 2018 include the updated 2019 instructions, and installers with only the early model instructions can download the late model 2019 instructions.
The 1/4 inch steel and billet aluminum parts are powder coated, and the kit is engineered to eliminate ball joint, tie rod and steering bind. Check the wheel and tire sizes against the listed combinations before ordering.
Vehicle fitment
It fits the 2007-2017 Chevrolet Silverado 1500 and the 2007-2018 GMC Sierra 1500 across the trim levels, along with the Tahoe, Suburban and Yukon XL models. Confirm your vehicle’s year, model and trim before ordering.
The 2019 GMC Sierra 1500 Limited is listed, but the 2019 installation steps differ from earlier years, so use the instructions for your model year.
Installation notes
Follow the instructions that match your model year, since the 2019 steps are different from the early model steps. An alignment is needed after installation.
What’s included
The kit includes the front leveling spacers. Check the hardware against your installation before starting.









