Overview
The Fabtech FTL5206 is a 2.5 inch front leveling kit with coil spring spacers for the Ford F-250 and F-350 Super Duty from 2011 to 2015. It is a front lift only, and it is finished in black.
The kit is heavy duty and engineered to eliminate ball joint, tie rod and steering bind. The steel hardware is powder coated, and the aluminum parts are aircraft grade billet.
Key features
- 2.5 inch front lift
- Coil spring spacers
- 1/4 inch thick steel with high grade hardware
- Aircraft grade billet aluminum
- Powder coated for maximum corrosion resistance
- 5 year, 60,000 mile powertrain warranty
Spacer kits and heavy loads
Super Duty trucks carry heavy front ends, so a coil spring spacer is a common way to level the front without replacing the springs. Spacers change the height of the coil, which means the load path, the bump stops and the steering geometry all shift. A heavier-duty kit is worth considering when the truck tows or hauls, since the front suspension works harder at a higher ride height.
Think about the whole front end before you start. Ball joints, tie rod ends, control arm bushings and sway bar links are often replaced when a lift is installed because they work at a new angle. Brake hoses should be checked for length, and the steering should be tested at full lock for clearance. Plan an alignment once the work is finished, and keep the installation instructions with the truck for future reference.
- Inspect ball joints and tie rod ends
- Check brake hose length at full lock
- Review bump stop condition
- Schedule a wheel alignment after installation
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTL5206 |
| UPC | 674866090842 |
| Lift | 2.5 inches, front |
| Front lift method | Coil spring spacers |
| Finish | Black, powder coated |
| Warranty | 5 year, 60,000 mile powertrain |
| Wheel backspace | 5 1/2 inch |
Vehicle fitment
Make sure your truck’s year, model and trim fall in the covered range before you buy.
Installation notes
The listed tire and wheel combinations need minor trimming, and an alignment is needed after the kit is installed.
What’s included
Review the included parts against your installation plan before you begin.









