Overview
The Fab Fours FF15-H3252-1 is a winch front bumper with a pre-runner guard for 2015 to 2017 Ford F-150 trucks, in black powder coat and sized for winches up to 12,000 lb.
The pre-runner guard sits between the plain winch bumper and the full guard version, adding front protection without a full grill. It comes with 90mm fog lights and 60mm turn indicator lights, and the shape gives more tire clearance so the tires are less likely to rub.
The 1/4-inch boxed mounting system can be adjusted to fit Fab Fours’ injection molded light housings, which allows a custom fit. A full guard version and a base version are also available. The pre-runner guard suits owners who want a guard but not the full grill.
Key features
- Pre-runner guard design
- Winch ready for winches up to 12,000 lb or smaller
- 3/4-inch D-ring mounts
- Boxed 1/4-inch mounting system with adjustability
- 90mm fog and 60mm turn indicator lights included
- Two-stage matte black powder coat
- 3/16-inch steel
- Made in the USA
Winch bumper setup and upkeep
Mounting a winch to a bumper concentrates force at a few points, so the mount, bolts and frame brackets should be checked regularly. Tighten fasteners after the first few drives and again periodically, and look for any gap opening between the winch and its mount. A pre-runner guard adds front coverage, but it also adds weight to the nose, which is worth considering when the winch is installed.
Power is the other key item. A winch draws heavy current, so a fused feed sized for the winch and a solenoid placed close to the battery are standard practice. Lights should run through their own circuit so that a winch load does not dim them during a recovery. Route all wiring away from hot exhaust parts and moving suspension components.
Before a trail trip, check the winch cable for fraying, confirm the hook and fairlead are clean, and make sure the recovery gear is rated for the load. Tire clearance around a guard should also be checked after tire changes, since a larger tire can change how close the tread sits to the bumper.
- Winch mount bolts checked after first drives
- Fused feed and solenoid close to battery
- Winch cable inspected for fraying before trips
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | FF15-H3252-1 |
| UPC | 5810109790 |
| Type | Winch front bumper with pre-runner guard |
| Position | Front |
| Width | Full |
| Material | 3/16-inch steel |
| Finish | Two-stage matte black powder coat |
| Fit type | Direct fit |
| Winch mount | Included (up to 12,000 lb winches) |
| D-ring mounts | Included, 3/4-inch |
| Lights | 90mm fog and 60mm turn indicator lights included |
Vehicle fitment
Fab Fours lists FF15-H3252-1 for the 2015 to 2017 Ford F-150.
The list stops at 2017, so the 2018 F-150 is not covered, and the 2009 to 2014 trucks are not either. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The winch goes on the mount provided; use a fused power feed. The included lights are wired into the truck’s harness.
What’s included
- Winch front bumper with pre-runner guard
- Winch mount
- 3/4-inch D-ring mounts
- 90mm fog and 60mm turn indicator lights
Not included: The winch and its wiring.












