Overview
The Fab Fours Winch Front Bumper with No Guard, part number TT14-H2851-1, is a black powder-coated steel winch bumper for the 2014–2018 Toyota Tundra.
The Premium winch bumper puts strength and durability first and sets the bumper line farther out for better tire clearance. It has integrated fog and turn lights, air ducts and D-ring mounts, and it accepts winches up to 12,000 lb. The bumper is made in the USA from 3/16 steel with a 1/4 inch boxed mounting system that adjusts to a custom fit, and the fog and turn lights are included. This part number is the no guard version. The 2014–2018 Tundra also has a sibling bumper, TT14-H2852-1, which includes a winch mount and 3/4 inch D-ring mounts. The 3/16 steel body carries a black powder coat.
Key features
- No guard winch bumper
- Accepts winches up to 12,000 lb or smaller
- 3/4 inch D-ring mounts
- Fab Fours 90mm fog and 60mm turn indicator lights included
- 1/4 inch boxed mounting system with adjustment
- 3/16 steel, black powder coat, made in the USA
Choosing a winch setup
A winch bumper is only as good as the winch and the vehicle behind it. Pick a winch rated for the vehicle’s weight and the kind of recovery you expect, and check that its mounting plate, cable or synthetic rope, and fairlead suit the bumper’s winch mount. Mounting a winch on a front bumper adds weight at the nose, which changes steering feel and suspension load, so upgrades to the front springs or shocks are often considered when a heavy winch is added.
Electrical planning matters as much as the mechanical fit. A winch draws a large current under load, so the battery cable, the relay and the fuse should be sized for the winch and wired with proper grounding. The fog and turn lights on this bumper draw power too, so check that the system can handle them together. Inspect the winch cable or rope after each recovery for fraying, kinks and damage, and replace it when wear shows.
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | TT14-H2851-1 |
| UPC | 5810107765 |
| Position | Front |
| Width | Full |
| Material | Steel, 3/16 |
| Finish | 2-stage matte black powder coat (bare steel is -B instead of -1) |
| Guard | None |
| Winch rating | Up to 12,000 lb or smaller |
| D-ring mounts | 3/4 in, included |
| Winch mount | Included |
| Light mounts | Included |
| Fit type | Direct fit |
Vehicle fitment
The bumper fits the 2014–2018 Toyota Tundra including 1794 Edition, Limited, Platinum, SR, SR5 and TRD Pro trims. It does not fit the 2007–2013 Tundra, which uses a different Fab Fours bumper. Confirm your vehicle’s year, model and trim before ordering.
The bumper is not for the 2007–2013 Tundra, which uses a different Fab Fours bumper. Confirm your vehicle’s year, model and trim before ordering.
What’s included
- Winch front bumper without guard
- Winch mount
- D-ring mounts
- 90mm fog and 60mm turn indicator lights
Not included: A winch.












