Overview
The Fab Fours Vengeance Series DR16-V4051-1 is a black powder coated steel front bumper for the 2016–2018 Ram 2500 and Ram 3500.
It is a lightweight premium steel sensor bumper, fitted high and tight to the contours of the truck, with a lower cutout for airflow. Its design suits the Vengeance Series’ steel construction and bolt-on approach.
It is a complete bolt-on bumper with brackets that tie directly to the frame. A center mount takes a Rigid Industries 20 inch LED light bar, and side mounts take two 2×2 Dually lights. The light bar and Dually lights are sold separately. It can be ordered with no guard or a pre-runner guard.
Key features
- Complete bolt-on front bumper with brackets that tie to the frame
- 11 ga. U.S. steel construction
- 2 stage black powder coat
- Center mount for a Rigid Industries 20 inch LED light bar
- Side mounts for two 2×2 Dually lights on each side
- Lower cut out for airflow
- Light mounts included
Light bars and wiring
Front bumpers with light mounts often carry a light bar, so the wiring and mounting need planning. A light bar should be connected through a switch and a fused feed, and the cable should be routed away from moving parts and hot exhaust areas. Secure the cable at intervals so it cannot chafe against the bumper or the frame.
Added weight at the front matters as well. A steel bumper with a light bar changes how the front suspension loads, so check the aim of the lights after installation and again after rough trail use. Lens covers and wiring grommets are worth checking regularly, since road grit and vibration can work loose over time. Replace any cracked lens cover promptly.
- Use a switch and fused feed for the light bar
- Re-aim lights after installation
- Check cable clamps after rough use
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | DR16-V4051-1 |
| UPC | 5810112738 |
| Product type | Front bumper |
| Series | Vengeance |
| Position | Front |
| Width | Full |
| Material | Steel, 11 ga. U.S. steel |
| Finish | Black powder coat, 2 stage |
| Weight (no guard) | 65 lbs |
| Weight (pre-runner guard) | 75 lbs |
| Light mounts | Included |
| D-ring mounts | Not included |
| Winch mount | Not included |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Fab Fours DR16-V4051-1 bumper covers these vehicles, with the trim levels shown:
- 2016–2018 Ram 2500 (Big Horn, Laramie, Laramie Longhorn, Limited, Outdoorsman, Power Wagon, SLT, Tradesman)
- 2016–2018 Ram 3500 (Big Horn, Laramie, Laramie Longhorn, Limited, Lone Star, SLT, Tradesman)
The list does not include the Ram 1500, or Ram 2500 and 3500 model years outside 2016–2018. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
- Test-fit the bumper on its mounting points before final tightening.
- Re-check fastener tightness after the first drives.
- If drilling or cutting is required, hire a professional and touch up any bare metal.
- Fab Fours lists weights of 65 lbs without a guard and 75 lbs with the pre-runner guard, so plan for lifting help when installing.
What’s included
- Front bumper
- Mounting brackets that tie to the frame
- Light mounts
Not included: The Rigid Industries 20 inch LED light bar and the 2×2 Dually lights are not included. D-ring mounts and a winch mount are not included either.












