Select your vehicle
-13%

Fab Fours Black Steel Elite Adaptive Cruise Control Relocation Bracket (Black) – RGMOD-1

Fab Fours

Shop Ford F-150 Front Bumpers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • For the 2018 Ford F-150 Black Steel Elite Bumper
  • Relocates adaptive cruise control
  • Reuses the OE plastic cover
  • 11-gauge steel, matte black

Description

Overview

The Fab Fours Black Steel Elite Adaptive Cruise Control Relocation Bracket, part number RGMOD-1, is a matte black 11-gauge steel bracket that moves the adaptive cruise control module on a 2018 Ford F-150 fitted with a Fab Fours Black Steel Elite Bumper.

The bracket lets owners keep adaptive cruise control while adding cubed lighting. It reuses the original equipment plastic cover and has mounts on each side for two 3 x 3 cube lights, which are not included.

Key features

  • Relocates the Adaptive Cruise Control Module
  • Made to work with the Black Steel Elite Bumper
  • Reuses the OE plastic cover
  • Mounts for two 3 x 3 cube lights on each side
  • 11-gauge steel, matte black powder coat
  • Made in the USA

Setting up cruise control and lights

Moving the adaptive cruise module changes where its sensor looks, so the new position matters. Mount the bracket securely and confirm the module is level and clear of the bumper structure before closing the cover. Check that the cover seats fully so weather stays out of the module.

Cube lights added in the same area should run on their own circuit with a proper fuse, routed away from the sensor path. After installation, test the cruise system on a clear road at low speed. Re-check the bracket bolts after the first few drives, since vibration can loosen them.

  • Confirm the module is level before closing the cover
  • Fuse cube light wiring on its own circuit
  • Re-check bracket bolts after early drives

Specifications

Brand Fab Fours
Part number RGMOD-1
Material Steel, 11 gauge
Finish Matte black powder coat
Width Full
Light mounts Included, two 3 x 3 cube lights per side
Winch mount Not included
D-ring mounts Not included
Fit type Direct fit

Vehicle fitment

The RGMOD-1 fits the 2018 Ford F-250 Raptor trim and the 2018 Ford F-150 trims covered here.

The bracket is for the 2018 F-150 only and for the Elite bumper, not the plain Black Steel Bumper. Confirm your vehicle’s year, model and trim before ordering.

What’s included

  • Adaptive cruise control relocation bracket in matte black

Not included: The Black Steel Elite Bumper and the 3 x 3 cube lights.

SKU: FFIRGMOD-1 Category:

Specification

Shipping weight 25.00 lbs
Package dimensions 36.00 × 12.00 × 4.00 in
brands

Fitment

VehicleYearsTrims
Ford F-1502018Raptor

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

What bumper is the RGMOD-1 for?

The RGMOD-1 is made for the Fab Fours Black Steel Elite Bumper on the 2018 Ford F-150. The plain Black Steel Bumper uses the KGMOD-1 bracket.

Does the RGMOD-1 add lights?

The RGMOD-1 has mounts on each side for two 3 x 3 cube lights, but the lights are not included.

Does the RGMOD-1 reuse any factory parts?

Yes. The RGMOD-1 reuses the original equipment plastic cover for the adaptive cruise control module, so the factory cover is kept and placed on the relocated module.

Does the cruise control system need recalibration after the module moves?

Check it once the bracket is in place and the cover is fitted. Test the system on a clear road at low speed before relying on it. If it reports a fault or does not engage normally, have a qualified technician verify the sensor position and alignment.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Ford F-150 Front Bumpers on Amazon