Overview
The Fab Fours DR10-V2952-B is a Vengeance Series pre-runner front bumper in bare steel for 2010 to 2018 Ram 2500 and 3500 trucks, left uncoated so the owner can finish it as they like.
The bare version has the same shape as the black powder coat one: a lightweight steel body, a center position for a 20-inch LED light bar and a lower cutout that lets air reach the intercooler. The pre-runner guard version weighs 75 lb. The fit is high and tight, with a sleek, aggressive look on and off the road.
Key features
- Bare steel finish, ready for paint or coating
- Pre-runner guard version
- Center position for a 20-inch LED light bar, not included
- Mounts for two 2×2 Dually lights on the sides
- Lower cutout for intercooler airflow
- Bolt-on brackets tie directly to the frame
- 11 ga. U.S. steel construction
- Non-winch bumper
- Fit described by Fab Fours as high and tight to the truck
Painting bare steel bumpers
Bare steel needs a complete finish before the truck sees weather. Start with clean, dry metal: remove oil, road film and any mill scale, then scuff the surface so primer can grip. Apply a metal primer, followed by a topcoat rated for exterior use. Paint the back side as well, since rust often starts on hidden surfaces.
Consider how the bumper will be used before picking a finish. A truck driven on trails will take stone chips and scrapes, so a tougher coating can slow rust at exposed edges. Let each coat cure fully before the bumper goes on the truck, and keep mounting holes free of paint so the brackets seat properly.
- Remove oil and mill scale before priming
- Use metal primer on welds and cut edges
- Let each coat cure fully before fitting
- Mask bolt holes so brackets seat properly
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | DR10-V2952-B |
| UPC | 5810110901 |
| Type | Vengeance pre-runner front bumper |
| Position | Front |
| Width | Full |
| Material | Steel, 11 ga. U.S. steel |
| Finish | Bare steel |
| Weight | 75 lb with pre-runner guard |
| Fit type | Direct fit |
| Light mounts | Included |
| Winch mount | Not included; non-winch bumper |
Vehicle fitment
Fab Fours lists DR10-V2952-B for the 2010 Dodge Ram 2500 and 3500 and the 2011 to 2018 Ram 2500 and 3500.
This bumper covers the Ram 2500 and 3500 only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bare steel will rust, so plan to paint or coat the bumper before it goes on the truck. The brackets bolt to the frame, and any lights on the center or side mounts need their own fused wiring. Keep the lower cutout clear of obstructions after lights are added, since that opening passes air to the intercooler.
What’s included
- Vengeance pre-runner front bumper in bare steel
- Frame brackets
Not included: Paint or coating, the LED light bar and the Dually lights.
















