Overview
The Fab Fours FF15-D3272-1 is an Aero Series front bumper with a pre-runner guard for 2015 to 2017 Ford F-150 trucks, built from tube and plate steel and finished in black powder coat.
Aero is Fab Fours’ ultra light hybrid design, and the pre-runner guard version is listed at 55 lb. It follows the contours of the truck, retains the factory skid plate and gives greater tire clearance. A center cutout accepts a Rigid Industries 20-inch LED light bar, which is sold separately.
The fit is high and tight and follows the body lines of the truck. The fluted castles are a signature of the Aero design. The same bumper is also offered without a guard under a different part number.
Key features
- Pre-runner guard version, 55 lb
- Tube and plate hybrid in 11 ga. U.S. steel and 1.75-inch tubing
- Retains the factory skid plate
- Greater tire clearance
- Center mount for a Rigid Industries 20-inch LED light bar
- High and tight fit to the vehicle’s contours
- Two-stage black powder coat
- Optional M3850-1 relocation bracket
Guard choices for trail use
A pre-runner guard covers the front face of the bumper and helps protect the grille and headlights from brush and rock contact at low speed. It adds weight and can change the approach angle, so it suits drivers who spend more time on rough trails than in tight town parking.
When comparing guard styles, check how the guard mounts to the bumper and whether it restricts radiator airflow or the path of air to the intercooler. The guard’s mounting hardware should be inspected after every run on rocky ground, because repeated impacts loosen bolts first.
Test the steering lock once the guard is on, so the guard does not catch the hood or the headlight housings when turning.
- Inspect guard welds after hard hits
- Keep radiator and intercooler airflow unobstructed
- Confirm the guard clears the hood at full steering lock
- Replace any guard with cracked mounting tabs
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | FF15-D3272-1 |
| UPC | 5810115173 |
| Type | Aero Series front bumper, pre-runner guard |
| Position | Front |
| Width | Full |
| Material | 11 ga. U.S. steel and tubing, 1.75-inch diameter, .120 wall |
| Finish | Two-stage black powder coat |
| Weight | 55 lb with pre-runner guard |
| Dimensions | Length 84 in, height 30 in, width 26 in |
| Fit type | Direct fit |
| Light mounts | Included |
| Winch mount | Not included |
Vehicle fitment
The listed fitment for FF15-D3272-1 is the 2015 to 2017 Ford F-150.
Other F-150 generations, such as the 2009 to 2014 and 2017 to 2018 trucks, are outside the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Brackets tie the bumper to the frame in a bolt-on installation. To keep factory technology features such as Adaptive Cruise Control and Park Assist, Fab Fours points to its optional M3850-1 relocation bracket.
What’s included
- Aero Series pre-runner front bumper in black powder coat
- Frame brackets
Not included: The LED light bar and the optional M3850-1 relocation bracket.
















