Overview
The Fab Fours Vengeance Series Pre-Runner Front Bumper in black, part number TT14-D2852-1, is a non-winch steel front bumper with a Pre-Runner guard. The Vengeance line is a light weight bumper built from premium steel.
It is a sensor-style bumper with a center spot for a 20 inch LED light bar, side mounts for 2×2 Dually lights, and a lower cutout that moves airflow to the intercoolers.
Fab Fours says Vengeance bumpers give the front of a truck a sleek and stylish finish with an aggressive look both on and off the road. They are offered with no guard or a Pre-Runner guard, and this part number is the Pre-Runner guard version. The light mounts at the center and sides allow maximum LED light coverage.
Key features
- Pre-Runner guard front bumper, no winch
- Light weight: 65 lbs with no guard, 75 lbs with the Pre-Runner guard
- Center mount for a Rigid Industries 20 inch LED light bar
- Side mounts for two 2×2 Dually lights
- Lower cutout for airflow to intercoolers
- 11 ga. U.S. steel
- 2 stage black powder coat
- Complete bolt-on bumper made in the USA
Mounting lights on a bumper
A bumper with a center light mount and side mounts for Dually lights needs careful planning of the wiring. Route harnesses away from moving parts and sharp edges, and use the mounting points the bumper provides rather than drilling new holes. Position the light bar so it does not block the cooling airflow that the lower cutout is there to feed.
Lights add weight and wind load at the front of the vehicle, so check that the mounts are tight after the first drives, especially on washboard roads. Inspect the wiring and connectors for chafing, and keep a spare fuse and relay handy. Mount lights low enough to avoid sitting above the hood line where they can catch branches.
- Route wiring away from moving parts
- Re-torque light mounts after rough roads
Specifications
| Brand | Fab Fours |
|---|---|
| Series | Vengeance Series |
| Part number | TT14-D2852-1 |
| UPC | 5810110994 |
| Part type | Front bumper with Pre-Runner guard |
| Material | 11 ga. U.S. steel |
| Finish | 2 stage black powder coat |
| Weight, no guard | 65 lbs |
| Weight, Pre-Runner guard | 75 lbs |
| Winch mount | Not included |
| D-ring mounts | Not included |
| Light bar mount | Center mount for a 20 inch LED light bar |
| Side light mounts | 2×2 Dually lights |
| Fit style | Direct fit |
Vehicle fitment
It is a direct fit bumper, but no vehicle year or model is attached to it. Confirm the application before use.
The TT14 part number prefix is not a stated vehicle, so confirm the application with Fab Fours before use. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Provided brackets tie to the frame for a bolt-on fit. The light bar and lights are mounted separately.
What’s included
- Vengeance Pre-Runner front bumper
- Mounting brackets that tie to the frame
Not included: the light bar and the 2×2 Dually lights.
