Overview
The Fab Fours Winch Front Bumper with No Guard in black powder coat, part number TT16-B3651-1, is a steel front bumper for the 2016–2018 Toyota Tacoma. Fab Fours designs it for strength and durability, with more tire clearance to reduce rubbing.
The bumper is built to accept a small frame winch up to 10,000 pounds and includes fog and turn indicator lights in injection-molded housings. It is made in the USA. The same bumper is also available in full guard and pre-runner guard versions.
Key features
- Winch ready: accepts a small frame winch up to 10,000 lb
- 3/16 inch steel construction
- 7/8 inch D-ring mounts
- Two-piece mounting system with adjustability for a custom fit
- Signature injection-molded light housings
- 90mm fog lights and 60mm turn indicator lights included
- Two-stage black powder coat
- More tire clearance than the stock bumper, which Fab Fours says helps stop rubbing
Winch and light wiring
A front winch adds weight and changes how the bumper and frame share load. Check that the winch mounts and the bumper’s mounting bolts are tight after the first recovery, and look for cracks around the winch plate. Fit the winch and bumper together while the vehicle is level so the alignment of the mounts is correct.
Fog and turn indicator lights need clean wiring. Route the harness away from heat and moving parts, use weatherproof connectors, and secure the wire with clips so it does not chafe on the bumper. Test the lights and turn signals before the first trail run. Good wiring habits protect the vehicle’s electrical system and keep lights working in mud and water.
- Winch line and hook care
- Light harness routing
- Bumper bolt torque checks
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | TT16-B3651-1 |
| UPC | 5810111779 |
| Product type | Winch front bumper |
| Guard style | No guard |
| Position | Front |
| Width | Full |
| Material | Steel |
| Steel thickness | 3/16 inch |
| Finish | Two-stage black powder coat |
| 220-250 lbs | |
| Maximum winch | 10,000 lb, small frame |
| D-ring mounts | 7/8 inch, included |
| Included lights | 90mm fog and 60mm turn indicator |
| Winch mount | Included |
| Fitment type | Direct fit |
Vehicle fitment
This front bumper fits the 2016–2018 Toyota Tacoma. Earlier and later Tacoma generations are outside those years. Confirm your vehicle’s year, model and trim before ordering.
Earlier and later Tacoma generations are outside the listed years. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bumper uses a two-piece mounting system that Fab Fours says can be adjusted for a custom fit. Wiring the included fog and turn indicator lights is part of the installation, so plan the wiring to suit the lights and any local rules.
What’s included
The no guard bumper with D-ring mounts, winch mount, and the 90mm fog and 60mm turn indicator lights.
Not included: The winch itself.














