Select your vehicle

Fab Fours Vengeance Series Front Bumper (Bare)- DR13-D2951-B

Fab Fours

Shop Ram 1500 Front Bumpers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Bare steel Vengeance front bumper, no guard, for 2013 to 2018 Ram 1500
  • Ready for your own paint or coating
  • Center mount for a 20-inch LED light bar, not included
  • 11 ga. U.S. steel, intercooler airflow cutout

Description

Overview

The Fab Fours DR13-D2951-B is a bare steel Vengeance Series front bumper without a guard for the 2013 to 2018 Ram 1500, supplied uncoated so it can be painted or finished by the owner.

This is the unfinished twin of the black powder coat Vengeance bumper. It keeps the lightweight 11 ga. U.S. steel body, the center cutout for a Rigid Industries 20-inch LED light bar and the side mounting options for two 2×2 Dually lights. The no guard bumper weighs 65 lb. The angles of the bumper can make parking sensors read the ground on a non-lifted truck.

Key features

  • Bare steel finish with no coating applied
  • No guard version, 65 lb per Fab Fours (75 lb with the pre-runner guard)
  • Center mount for a Rigid Industries 20-inch LED light bar, not included
  • Side mounting for two 2×2 Dually lights, not included
  • Lower cutout to provide airflow to intercoolers
  • Brackets that bolt directly to the frame
  • 11 ga. U.S. steel
  • Made in the USA

Rust protection for raw steel

Raw steel starts rusting as soon as moisture reaches it, so the first job is protecting the bumper before it is fitted. Clean the metal, apply a primer that bonds well to steel, and follow with a topcoat that suits how the truck is used. Pay attention to cut edges, bracket holes and welds, since those spots often rust first.

Plan the finish around the bumper’s job. Bumpers take road spray, grit and light impacts, so a durable topcoat and a clear layer over the top help slow corrosion. Store the bumper off the ground and under cover during painting. After the truck is driven, rinse off salt and mud, dry the surface, and check for chips that need touch-up before they grow.

  • Prime cut edges and weld seams first
  • Rinse off road salt and mud regularly
  • Touch up chips before corrosion spreads
  • Store the bumper under cover while curing

Specifications

Brand Fab Fours
Part number DR13-D2951-B
UPC 5810110840
Type Vengeance front bumper, no guard
Position Front
Width Full
Material Steel, 11 ga. U.S. steel
Finish Bare steel
Fit type Direct fit
Light mounts Included
Winch mount Not included
D-ring mounts Not included

Vehicle fitment

It is a direct fit for the 2013 to 2018 Ram 1500.

Neither the Ram 2500 and 3500 nor earlier Ram 1500 years appear in the list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

A bare steel bumper needs paint or a coating before use to keep rust away. Mounting is bolt-on to the frame with the brackets provided, and any lights added to the center or side mounts need their own fused wiring. Keep the lower cutout clear so air can reach the intercooler.

What’s included

  • Vengeance front bumper in bare steel, no guard
  • Frame brackets

Not included: Paint or coating, the LED light bar, the Dually lights, a winch mount and D-ring mounts.

SKU: FFIDR13-D2951-B Category:

Specification

Shipping weight 125.00 lbs
Package dimensions 84.00 × 30.00 × 26.00 in
brands

Fitment

VehicleYearsTrims
Ram 15002013–2018Big Horn, Express, HFE, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, R/T, Rebel, SLT, ST, Special Service, Sport, Tradesman

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

What is the difference between DR13-D2951-B and DR13-D2951-1?

The -B bumper is bare steel with no coating, while the -1 bumper has a two-stage black powder coat. Both are the no guard Vengeance for the 2013 to 2018 Ram 1500.

Does the bare steel bumper need to be finished?

Yes. Bare steel has no coating, so it should be painted or otherwise protected before it sees weather. Fab Fours sells the black powder coat version as DR13-D2951-1.

Can parking sensors be used with this bumper?

Yes, it is built as a sensor bumper, but the angles may make the sensors read the ground on a non-lifted truck.

Are lights included with the DR13-D2951-B?

No. The bumper provides a center mount for a 20-inch LED light bar and side positions for two 2x2 Dually lights, but those lights must be bought separately.

How often should a bare steel bumper be inspected?

Check it every few months and after any hard road or trail contact. Look for rust at bolt holes, weld seams and lower edges, and touch up bare spots early before corrosion spreads under the coating.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Ram 1500 Front Bumpers on Amazon