Overview
The Fab Fours Front Bumper with Sensor in black, part number CH14-C3051-1, is a premium steel winch bumper with no guard for the 2015–2018 Chevrolet Silverado 2500 HD and 3500 HD. Fab Fours redesigned its center section with four integrated sensor holes so the bumper works with factory-equipped sensors.
The sensor holes are laser cut in the factory pattern and fit the OEM sensor housing, which supports the factory park assist system.
Key features
- Winch bumper with no guard and four integrated sensor holes
- Sensor holes laser cut in the factory pattern, compatible with the OEM sensor housing
- Redesigned center section and internal winch tray with a new D-ring and fairlead location
- Access slots in the lower tray for the factory sensor harness to pass through
- Winch ready for winches up to 16,500 lb
- Combination of 1/4 inch and 3/16 inch steel with a 1/4 inch boxed mounting system
- 3/4 inch D-ring mounts, plus 90mm fog lights and 60mm turn indicator lights
- Two-stage matte black powder coat; bare steel uses -B instead of -1
Sensor bumper installation
Sensor bumpers keep the factory park assist system working by placing the sensor openings where the truck expects them. Before installation, check the sensor harness routing and make sure the access slots allow the harness to pass without pinching. A sensor that is not seated fully can give false readings, so take time to set each one correctly.
A winch tray with a fairlead and a winch mount adds weight at the front, which affects braking and steering feel. Plan for that change and check the mounts after rough use. Clean the sensor faces and the surrounding area regularly, since mud or ice can block signals. If a sensor fails, replacing it with the same factory-pattern unit keeps the system consistent.
- Route the harness away from sharp tray edges
- Clean sensor faces after mud or snow
- Recheck winch tray bolts after the first trips
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | CH14-C3051-1 |
| UPC | 5810109424 |
| Product type | Sensor winch front bumper |
| Guard style | No guard |
| Position | Front |
| Width | Full |
| Material | Steel, 1/4 inch and 3/16 inch |
| Finish | Two-stage matte black powder coat |
| Sensor holes | 4, laser cut in the factory pattern |
| Maximum winch | 16,500 lb |
| Included lights | 90mm fog and 60mm turn indicator |
| Light mounts | Included |
| Winch mount | Included |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 2015–2018 Chevrolet Silverado 2500 HD and 3500 HD.
Other model years are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The factory sensor harness passes through access slots cut into the lower portion of the winch tray. The boxed mounting system adjusts for fit, and the included lights need wiring.
What’s included
The sensor winch bumper with its winch mount and the 90mm fog lights and 60mm turn indicator lights.
Not included: The winch and the factory sensors, which are re-used from the truck.









