Overview
The Fab Fours Vengeance Series Front Bumper in black, part number FS17-V4151-1, is a lightweight 11 ga. U.S. steel front bumper with a 2 stage black powder coat finish.
The fit is high and tight to the contours of the vehicle, a lower cutout lets air through, and a center cutout takes a 20 inch LED light bar. The bumper bolts to the frame with the brackets provided.
The bumper is lightweight, with a sleek black finish and lower cutouts that give it an aggressive look on and off the road. It is offered with no guard or with a Pre-Runner guard, weighing 65 lbs without a guard and 75 lbs with the Pre-Runner guard.
Key features
- Black powder coat finish
- High and tight fit to the contours of the vehicle
- Center mount for a Rigid Industries 20 inch LED light bar
- Mounts on each side for two 2×2 Dually lights
- Lower cutout for maximum airflow
- Complete bolt-on design with brackets that tie to the frame
- 11 ga. U.S. steel, made in the USA
- Available with no guard or with a Pre-Runner guard
Preparing for the light bar
A front bumper changes the weight balance and the approach angle of a truck, so the choice of guard and light setup affects how the front end feels on rough ground. Plan the light bar position before mounting the bumper, because the center cutout and side mounts determine where wiring has to run. Route harnesses away from the brackets and any moving parts, and use a fused connection so the lights are protected.
Check that the hood, grille and radiator still have clearance once the bumper is in place. Winch installations often need a separate plate or mounting point, so confirm that the bumper and frame can support the load you intend to use. After the first trail runs, look over every bracket and bolt for loosening.
- Plan wiring routes before mounting
- Check hood and radiator clearance
- Confirm winch load ratings separately
Specifications
| Brand | Fab Fours |
|---|---|
| Series | Vengeance Series |
| Part number | FS17-V4151-1 |
| UPC | 5810112394 |
| Part type | Front bumper |
| Material | 11 ga. U.S. steel |
| Finish | 2 stage black powder coat |
| Weight, no guard | 65 lbs |
| Weight, Pre-Runner guard | 75 lbs |
| Light bar mount | Center mount for a 20 inch LED light bar |
| Side light mounts | 2×2 Dually lights, two per side |
| Winch mount | Not included |
| D-ring mounts | Not included |
| Fit style | Direct fit |
Vehicle fitment
It is a direct-fit bumper. Confirm fit for your truck’s year, model and trim before ordering.
Use the Fab Fours application list for part number FS17-V4151-1 to see which truck it belongs on. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Brackets are provided and tie directly to the frame, making the install a bolt-on job. The light bar and Dually lights are mounted separately by the owner.
What’s included
- Vengeance Series front bumper
- Mounting brackets
Not included: the 20 inch LED light bar and the 2×2 Dually lights.
