Overview
The Fab Fours Toyota Tundra Rear Bumper, part number TT14-W2850-1, is a matte black rear bumper for the 2014–2018 Toyota Tundra. The bumper is designed around the existing receiver hitch, with D-ring recovery points added.
The design focuses on strength and durability. The bumper is built from 3/16-inch formed steel with a 2 stage matte black powder coat and has integrated steps on either side of the tailgate.
Key features
- Integrated steps on either side of the tailgate
- 3/16-inch formed steel construction
- 3/4-inch D-ring recovery points
- 1/4-inch keyed and gusseted mounts
- 2 stage matte black powder coat; the -B suffix denotes bare steel
- Retains the OEM receiver hitch and wiring locations
Steps and recovery points
Tailgate steps are handy for loading a bed, but they carry body weight and need solid mounting. Stand on them only with the tailgate closed and the bumper fully bolted, and check their attachment after rough trips. Steps mounted on a steel bumper can collect mud and water, so drain and dry them after wet weather to limit rust at the joints.
D-ring recovery points spread a pull across the bumper and the frame, so their mounts deserve attention. Use recovery straps rated for the load and attach them only to the D-rings, never to the hitch ball or the steps. Keyed and gusseted mounts help resist bending, but inspect the bolts and welds regularly, especially after a hard recovery. Keep the matte black powder coat touched up where stones have chipped it.
- Check the D-ring bolts after each recovery
- Keep the tailgate closed when using the steps
- Dry the steps after wet trips to slow rust
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | TT14-W2850-1 |
| UPC | 5810107802 |
| Product type | Full size rear bumper |
| Finish | 2 stage matte black powder coat |
| Steel construction | 3/16 in formed steel |
| Recovery points | 3/4 in D-rings |
| Mounts | 1/4 in keyed and gusseted |
| Position | Rear |
| Fit type | Direct fit |
| D-ring mounts | Not included |
| Tire carrier | None |
| Origin | Made in the USA |
Vehicle fitment
Fab Fours lists part TT14-W2850-1 for the 2014–2018 Toyota Tundra.
Earlier Tundra trucks from 2013 and before are not on this list, and the Tacoma is not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The original hitch and wiring locations are retained, so towing equipment carries over. D-ring mounts are not included with this bumper.
What’s included
One matte black rear bumper with integrated tailgate steps.














