Overview
The Fab Fours Vengeance Series Rear Bumper, part number CH11-E2151-1, is a lightweight black rear bumper for the 2011–2014 Chevrolet Silverado 2500 HD and 3500 HD. It is made from 11 gauge U.S. steel in South Carolina and weighs under 60 lb.
Two side openings take Rigid Industries 6-inch SR Series lights, one per side, and the lights are not included. The bumper has pre-cut openings that use the factory sensors and retains the OEM receiver hitch and wiring location.
Key features
- 11 gauge U.S. steel construction
- Lightweight design, 60 lb
- Two side openings for Rigid Industries 6-inch SR Series lights
- Pre-cut openings for the factory sensors
- Retains the OEM receiver hitch and wiring location
- Fab Fours 2 stage black powder coat
Sensor and light setup
Parking sensors rely on a clear, correctly aligned opening, so the pre-cut openings help keep the sensor spacing right. Keeping the sensor faces clean matters as well, since mud and ice can cause false alarms. After installation, check the sensor readings with a short test drive in a parking lot before relying on them.
Auxiliary lights on a bumper need a stable mount and a sealed wiring route. Side openings for work lights should be wired with a relay and a fused circuit, which protects the truck’s electrical system. Because the lights are sold separately, plan the wiring and switch location before ordering. Light lenses can crack under debris, so inspect them after rough trail use and replace them when they wear.
- Clean sensor faces before each trip in mud or snow
- Use a fused, relayed circuit for auxiliary lights
- Check light lenses for cracks after heavy use
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | CH11-E2151-1 |
| UPC | 5810114527 |
| Product type | Rear replacement bumper |
| Series | Vengeance |
| Steel | 11 gauge U.S. steel |
| Finish | 2 stage black powder coat (textured) |
| Weight | 60 lb |
| Light openings | Two, for 6 in SR Series lights |
| Position | Rear |
| Fit type | Direct fit |
| D-ring mounts | Not included |
| Tire carrier | None |
| Origin | Made in the USA |
Vehicle fitment
It is a direct fit for the 2011–2014 Chevrolet Silverado 2500 HD and 3500 HD.
GMC Sierra HD models and 2015 and newer trucks are not covered. Check the year, model and trim against your truck before ordering.
Installation notes
Sensor openings are pre-cut to match the factory sensors, so the existing parking sensors can be reused. Lights for the side openings are wired separately.
What’s included
One Vengeance rear bumper with pre-cut sensor openings.
Not included: Rigid Industries lights are not included.














