Overview
The Fab Fours premium rear bumper, part number TT16-W3650-1, is a black powder-coated rear bumper made from 3/16-inch steel. It integrates the existing receiver hitch and adds steps on either side of the tailgate, along with recovery points.
The bumper weighs 115 lb and is made in the USA from U.S. steel. The D-rings are cut from 3/4-inch steel and accept a shackle up to 7/8 inch. Confirm the model and model year on your truck before ordering.
Key features
- Two-stage black powder coat
- 3/16-inch steel construction
- Integrated steps on either side of the tailgate
- D-rings accept up to a 7/8-inch shackle
- Retains the OEM receiver hitch and wiring location
- Made in the USA from U.S. steel
Weight and mounting effects
A heavy steel bumper changes the balance at the rear of a truck. Extra weight on the back can lighten the front axle’s grip and affect braking and handling. Heavier bumpers also suit trucks that spend time off road, where the rear gets more abuse. Confirm the rear suspension and tire load rating before adding a bumper of this weight.
Mounting hardware carries the weight and the recovery load, so inspect the bolts, brackets and receiver hitch connection on a regular schedule. Surface rust at the welds and in mounting holes is an early sign of stress. Replace worn fasteners with the same grade the original mount used.
- Recheck mounting bolts after the first trips
- Inspect welds for cracks or rust
- Keep the shackle size matched to the D-rings
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | TT16-W3650-1 |
| Finish | Two-stage black powder coat |
| Material thickness | 3/16-inch steel |
| Weight | 115 lb |
| D-ring shackle capacity | Up to 7/8-inch shackle, D-rings cut from 3/4-inch steel |
| Origin | Made in the USA |
Vehicle fitment
Confirm the model and model year on your truck before ordering.
What’s included
One rear bumper with integrated steps and D-ring recovery points. Check the tire carrier and hitch hardware against your installation before starting.














