Overview
The Smittybilt 8 inch drop aluminum ball mount, part number 2938, is a Class 4 hitch for towing trailers up to 8,000 lbs gross trailer weight, with an 800 lb tongue weight. The 8 inch drop is for trailers whose coupler sits well below the receiver.
The mount is made from hard anodized 6061 aluminum, which resists weather and helps the finish hold. It is forged to give strength while keeping the weight down.
Key features
- 8 inch drop
- Class 4 rating
- Hard anodized 6061 aluminum
- Forged construction
- Satin finish
Long drops and ball height
Deep drops suit trailers that sit well below the receiver, but they change the angle of the hitch and the feel of the trailer on the road. A steep angle can reduce braking and steering feedback, so test the brakes at low speed in an empty lot before a longer trip. Keep the trailer level as far as the setup allows.
Because the ball sits lower, the mount takes more leverage from the trailer, so look for bending near the drop and any shift at the pin. Inspect the hitch before every trip and clean grit from the receiver. Replace the mount if it shows bending or cracks, since fatigue damage can grow quietly under load.
- Test brakes before a longer trip
- Check tire pressure on both vehicles
- Inspect the drop for bending
- Clean grit from the receiver before inserting
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 2938 |
| UPC | 631410111996 |
| Product type | Drop ball mount |
| Material | 6061 aluminum, hard anodized |
| Finish | Satin |
| Drop | 8 inch |
| Hitch class | Class 4 |
| Gross trailer weight | 8,000 lbs |
| Tongue weight | 800 lbs |
| Shank hole | 1 inch |
Vehicle fitment
No vehicle or model years are named for this mount. Confirm that your receiver is the 2 inch size the mount is designed for, and that your towing vehicle is rated for the trailer.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
An 8 inch drop changes the ball height considerably, so measure the trailer’s coupler height against the receiver before you buy. Keep the trailer within the Class 4 limits of 8,000 lbs gross trailer weight and 800 lbs tongue weight.









