Overview
The Dana Spicer D/S2002913 is a loaded differential carrier assembly for the Dana Super 30 axle. The carrier holds the ring gear and differential gears that split engine torque between the axle shafts, so it is the replacement part when an existing carrier is broken or worn.
The carrier arrives loaded, meaning it comes assembled with its internal components rather than empty. It is an O.E.-style unit built with new components to factory specifications.
Key features
- Loaded carrier assembly
- O.E. replacement carrier for the Dana Super 30 axle
- Components described by Dana Spicer as brand new
- Built to factory specifications.
Choosing a replacement carrier
A carrier is the housing that holds the ring gear and differential gears, so replacing it is a larger job than swapping a bearing or seal. Before buying, look at the condition of the axle shafts, bearings and pinion seal on the old unit, since worn bearings and a damaged seal often show up together with a cracked or chipped carrier. Replacing the carrier usually means new gear mesh, so plan on a full setup rather than a quick swap.
Loaded carriers come with their gears already assembled, which saves a step but still needs a matched ring and pinion. Keep the axle housing clean and inspect the axle tubes for damage before the new carrier goes in. Gasket surfaces should be cleaned to bare metal, and fresh gear oil should be used after the first break-in period of driving.
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | D/S2002913 |
| UPC | 70000668460 |
| Axle | Dana Super 30 |
| Carrier type | Loaded differential carrier assembly |
| Condition | New components |
Vehicle fitment
Fitment is not tied to a named vehicle here. Dana Spicer marks the carrier universal fit, but it is an axle component for the Dana Super 30, so match it to that axle type before ordering.
No year, model or chassis code is given, so do not assume it suits a vehicle with a different axle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replacing a carrier means removing the axle shafts and the old carrier, then setting ring and pinion mesh on the new one. Most owners have this done by an axle shop, since gear mesh and bearing preload need correct setup.
What’s included
One loaded differential carrier assembly.









