Overview
The 75101X is a Trac-Loc limited slip differential for a Chrysler 8.25 inch rear axle with 27 splines. The Trac-Loc design adds off-road traction while keeping the vehicle streetable.
The clutch pack is replaceable and is there to limit wheel slip. The part number is D/S75101X, and the assembly is an O.E. limited slip.
Key features
- Trac-Loc limited slip design
- Replaceable clutch pack
- Built for a Chrysler 8.25 inch rear axle
- 27 spline axle spline count
Gear oil and break-in
A limited slip differential depends on its clutch pack to split torque between the wheels, so the gear oil matters more than it does in an open unit. Limited slip gear oil usually contains a friction modifier, and using plain gear oil can cause chatter during turns. Check the fluid level after the first few trail runs and look for metal flakes that signal clutch wear.
Because the clutch pack is replaceable, a worn unit can often be serviced rather than fully swapped, though many owners replace the pack and the ring and pinion setup together. When reassembling, keep spacer shims and bearing preload consistent with the original setup. Torque the bolts to the specification for your axle and recheck them after the first short drive.
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | D/S75101X |
| Axle manufacturer | Chrysler |
| Axle location | Rear |
| Axle type | Chrysler 8.25 inch |
| Axle spline | 27 splines |
| Differential type | Limited slip assembly |
Vehicle fitment
This assembly is for a Chrysler 8.25 inch rear axle with 27 splines, so axle width and spline count are the points to match.
A different axle width or spline count means a different part. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
A limited slip assembly is installed inside the carrier, which means removing the axle shafts and checking ring gear backlash and bearing preload. An axle shop usually handles this. Support the vehicle securely before working under it.
What’s included
One Trac-Loc limited slip assembly. No additional parts are listed.










