Overview
The Grip LOK is an automatic locking differential for a rear Dana 60 axle with 35 splines and a 4.56 carrier or higher. Its automatic locking action is paired with a fully machined case for added strength.
The Grip LOK provides automatic mechanically actuated traction and is built for competition and off-road use. It arrives fully assembled, and friction additives and friction modifiers should not be used with it.
Power Trax says its traction systems are the ideal solution for just about any light truck, sport utility or muscle car on the road today, for daily commuting, recreation, work or simply putting power down on the pavement.
Key features
- Automatic mechanically actuated locking traction
- Fully machined case, combining locker action with case strength
- Strongest locking differential in the Power Trax line, per the manufacturer
- Fully assembled
- Designed for competition and off-road use
- Rear axle location
Locker setup for trails
A locking differential changes how both wheels share torque, which helps on loose or uneven ground where one wheel can lift. Gear ratio, tire size and axle housing condition all affect how the unit performs, so check them before installing. Matched tires help the locker work without stress on the drivetrain.
Installation on a Dana 60 typically involves carrier shims, bearing preload and backlash checks, so a qualified axle shop is a practical choice for this type of job. After the install, drive gently for the first few trips and check for leaks around the cover and axle seals.
- Keep tire sizes matched front to rear
- Check gear oil level after the first trips
- Inspect axle seals for leaks regularly
Specifications
| Brand | Power Trax |
|---|---|
| Part number | PTXLK446035 |
| Popular axle manufacturer | Dana |
| Axle location | Rear |
| Axle type | Dana 60 |
| Axle spline | 35 splines |
| Axle shaft diameter | 1.5 inches |
| Ring gear bolts | 12 |
| Cover bolts | 10 |
| Carrier | 4.56 and up |
| Differential case design | Dana 60 |
| Differential type | Limited slip assembly (locking action) |
| Gear oil | 80W-90 petroleum-based GL-5 (or higher) |
Vehicle fitment
It fits a long range of full-size vans, pickups and Jeep trucks, including the 1984 to 1994 Dodge B250, the 1984 to 1993 Dodge D250 and W350, the 1994 to 2003 Dodge Ram 2500 and 3500, the 2004 to 2006 Dodge Ram 1500, the 1984 to 2014 Ford E-250, the 1984 to 2005 Ford E-350, the 1999 to 2015 Ford F-250 and F-350 Super Duty, the 1984 to 1993 and 1995 to 1997 Ford F-350, the 2002 to 2005 Chevrolet Silverado 1500, the 1984 to 1991 GMC G2500 and G3500 vans, and the 1984 to 1988 Jeep J20.
The list is long and varies by body, trim and model. Confirm your vehicle’s year, model and trim against it before ordering.
Installation notes
Use 80W-90 petroleum-based gear oil with a GL-5 or higher rating. Power Trax says friction additives and friction modifiers should not be used, and that synthetic oils and oils containing friction modifiers are not recommended. The unit is designed for rugged competition and off-road traction needs.
What’s included
The unit arrives fully assembled. Check the package contents against your installation before starting.













