Overview
The Dick Cepek Torque 16×8 wheel in black, part number D/C90000000060, is a 16-inch spoke wheel 8 inches wide. It has an 8 on 6.5 bolt pattern and a 131 center bore, with 0 offset and 4.5 backspacing. Universal fit is the stated fitment, so no particular vehicle is named.
The Torque line suits newer trucks and SUVs that need room for larger brake calipers and factory tire pressure monitoring sensors. The flat black finish has machined accents under a satin clear coat, and it works for on-road and off-road use.
Key features
- 16-inch diameter and 8-inch width in a spoke style
- 8 on 6.5 bolt pattern with a 131 center bore
- 0 offset and 4.5 backspacing
- Flat black finish with machined accents
- Satin clear coat on aluminum construction
- Design stated to be compatible with factory tire pressure monitoring sensors
Tire and sensor setup
Tire selection affects how a wheel carries load, how it rolls on trail surfaces and how it clears the fender. A wider tire needs more room at the offset, and a taller sidewall changes the rolling diameter that the speedometer and traction control expect. Match the tire size and load range to the wheel before ordering, and recheck clearance once the assembly is mounted.
Factory tire pressure sensors need to be matched to the wheel’s valve stems and the vehicle’s receiver. Installing new valve stems or sensors during a tire change is a sensible time to check them. Inspect the bead seat and the spoke pockets for corrosion when the tire is removed, since moisture trapped there can shorten wheel life.
- Tire width and sidewall height
- Valve stem replacement at tire changes
- Sensor pairing after mounting
- Bead seat cleaning during service
Specifications
| Brand | Dick Cepek |
|---|---|
| Part number | D/C90000000060 |
| Series | Torque |
| Style | Spoke |
| Finish | Black |
| Construction | Aluminum |
| Wheel diameter | 16 inches |
| Wheel width | 8 inches |
| Bolt pattern | 8 on 6.5 |
| Center bore | 131 |
| Offset | 0 |
| Backspacing | 4.5 |
| Fitment | Universal fit |
Vehicle fitment
Universal fit is the only fitment information for this wheel, and no year, model or trim is attached. An 8 on 6.5 pattern is a specific hub layout, so measure the hub and compare it with the vehicle before deciding on this wheel.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Test-fit the 8 on 6.5 pattern and 131 center bore against your hub before mounting. Check that the wheel clears the brake calipers at 0 offset, and confirm the lug hardware seats correctly on the studs.
What’s included
The product covers the wheel alone, with no tires, lug nuts or sensors described.
Not included: tires, lug nuts and TPMS sensors, which need to be obtained separately.









