Overview
The FUEL Off-Road Assault D546 is an 18 x 9-inch aluminum mesh-style wheel, part number D54618902657, finished in black with milled accents. It lists two bolt-pattern forms, 5 on 4.5 or 5 on 5 and 5 on 4.5/114.3, with a 78 center bore and offset of 20. FUEL Off-Road classes it as universal fit, so no year, make or model is named.
Mesh styling gives an open face with spokes that stay visible through the wheel, finished in black with milled accents. Two bolt-pattern forms apply, so confirm which one matches your hub before comparing any other measurement.
Key features
- Mesh spoke style
- Aluminum construction
- 18-inch diameter and 9-inch width
- Two bolt-pattern forms: 5 on 4.5/5 on 5 and 5 on 4.5/114.3
- Offset of 20 and backspacing of 5.8
Mesh wheels and hub matching
Mesh-style wheels show more of the brake assembly through the face, so the caliper and rotor are easier to see and check. Keep the face clean around the spokes, where brake dust can build up. The open design does not change how the wheel seats on the hub, so bolt pattern and center bore remain the first checks.
Two bolt-pattern forms call for a careful measurement. Compare the stud spacing on the hub with each form, and make sure the lug seat style matches the nuts used. Wheel bearings and studs are worth a look while the wheel is off, since a wheel fitted to a worn hub will not stay tight.
- Clean behind the spokes after off-road use
- Compare stud spacing to each bolt form
- Inspect studs and bearings while the wheel is off
- Match lug seat style to the nuts
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | D54618902657 |
| Style | Mesh |
| Construction | Aluminum |
| Wheel diameter | 18 inches |
| Wheel width | 9 inches |
| Bolt pattern | 5 on 4.5/5 on 5 |
| Bolt pattern 2 | 5 on 4.5/114.3 |
| Center bore | 78 |
| Offset | 20 |
| Backspacing | 5.8 |
| Finish | Black/Milled |
| Fitment | Universal fit |
Vehicle fitment
No year, make or model applies to this wheel. Confirm the bolt pattern in either form against your hub, then check the center bore and offset, and measure clearance on your own vehicle before mounting.
The 5.8 backspacing and 20 offset determine how the inner face sits behind the brake parts, so clearance has to be measured on the actual vehicle.
Installation notes
Mount the wheel flat against the hub face, then tighten lug nuts in a star pattern over several passes. If the wheel bore is larger than the hub, use hub-centric rings sized to close that gap. Do not use a wheel whose bolt pattern does not match your hub.
What’s included
The wheel is the only item included. Lug hardware, center caps and tires are not part of it.
Not included: tires and lug hardware.









