Overview
The Detroit Locker 913A477 is a TrueTrac limited slip differential for Ford 9.75-inch rear axles with 34 splines. It is a gear driven Eaton-built unit with no clutch packs to wear out.
Its job is to keep both rear wheels pulling when one loses traction, by shifting torque to the tire on firmer ground. Owners of a Ford 9.75-inch rear should compare spline count before anything else.
Key features
- Gear driven, clutchless TrueTrac unit
- Redirects torque to the wheel that has traction
- No clutches that wear out
- Ford 9.75-inch axle with 34 splines
- Complete limited slip assembly
Measuring before you buy
Spline count is the first thing to check on any Ford 9.75-inch rear. Remove an axle shaft or look at the carrier side, then count the teeth around the splined end. A mismatch will not seat in the carrier, so count before ordering. Also check the axle housing size and the carrier cover bolt pattern.
Limited slip rears help most on loose or slick surfaces, where one wheel spins while the other needs drive. Gear-driven designs send torque to the wheel with grip without clutch packs to replace. Plan for the carrier to be set up by a differential shop, and keep the rear end fluid fresh.
- Count splines on the shaft ends
- Check the housing size
- Use limited slip gear oil at setup
Specifications
| Brand | Detroit Locker |
|---|---|
| Part number | 913A477 |
| UPC | 70000293062 |
| Manufacturer | Eaton |
| Differential type | Limited slip assembly, all gear driven |
| Axle location | Rear |
| Axle type | Ford 9.75 inches |
| Axle manufacturer | Ford |
| Axle spline count | 34 splines |
Vehicle fitment
No vehicle years or models are given. The unit is identified as a Ford 9.75-inch rear axole unit with 34 splines, so count the splines on your axle before ordering.
A Ford axle with a different spline count is not covered by this 34-spline identification. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Limited slip carriers need gear backlash and preload set correctly, which is best left to a differential specialist. Chock the wheels and secure the vehicle before working on the rear axle.
What’s included
Bearings, gaskets and hardware are not confirmed as included with this unit.






